GE GES-NX25IN Manual De Instrucciones Y Del Propietrario página 5

Operation
Inner side of the controller
FAN SPEED AUTO
AUTO
AUTO
TIMER
OFF ON
HOUR
QUIET
COOL TEMP
FAN
HEAT
TEMP
18 SMART DRY
SWING
FAN
HEALTH
17
MODE
AIRFLOW
SLEEP
16 POWER CODE
LIGHT
15 TIMER LOCK
CONFIRM
/CANCEL
15. LIGHT button
Control the lightening and
extinguishing of the indoor
LED display board.
16. POWER button
17.
HEALTH AIRFLOW button
18. SMART button
Used to set SMART
operation.
19. DRY button
Used to set DRY operation.
20. SWING button
FAN MODE button
21.
22.
CODE button
A-b yard
19
23. SLEEP button
20
21
22
24.
TIMER button
23
24
25.
LOCK button
25
26.
button
CONFIRM/CANCEL
26
Loading of the battery
1
Remove the battery cover;
2
Load the batteries as illustrated. 2 R-03 batteries, resetting key (cylinder);
Be sure that the loading is
3
Load the battery, then put on the cover again.
Note:
The distance between the signal transmission head and
the receiver hole should be within 7m without any obstacle
change-over wireless telephone is installed in the type
in receiving the signals, so the distance to the indoor unit
should be shorter.
Full display or unclear display during operation indicates the
batteries have been used up. Please change batteries.
If the remote controller can't run normally during operation,
please remove the batteries and reload several minutes later
Hint:
Remove the batteries in case unit won't be in usage for
a long period.
4
in line with the "+"/"-";