Cooper Lighting SQS505QD Manual De Instrucciones

SQS505QD
ENGLISH
ITEMS REQUIRED
(Purchase separately)
• Phillips screwdriver
• Adjustable wrench
• Pliers
WARNINGS AND CAUTIONS
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, EXPOSURE TO
EXCESSIVE UV RADIATION, OR INJURY TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS
Lighted lamp is HOT!
WARNING: When using outdoor use portable luminaires, basic safety precautions
should always be followed to reduce the risk of fire, electric shock, and personal injury.
WARNING: To reduce the risk of fire, electric shock, exposure to excessive UV radiation
or injury to persons:
• IMPORTANT: READ ALL SAFETY INSTRUCTIONS.
• Turn off/unplug and allow to cool before replacing bulb.
• Bulb gets HOT quickly! Only contact switch/plug when turning on.
• Do not touch hot lens, guard, or enclosure.
• Do not remain in light if skin feels warm.
• Do not look directly at lighted lamp.
• Keep away from materials that may burn.
• Use only with a 500 watt or smaller quartz halogen bulb.
• Do not touch the bulb at any time. Use a soft cloth. Oil from skin may damage bulb.
• Do not operate the portable luminaire with a missing or damaged guard, lamp containment
barrier, or UV filter.
• If lens is replaced, use only a diffused tempered safety glass of equal thickness.
• Use of bulb(s) of higher wattage rating than what is listed in the safety instructions will void
the warranty.
• For indoor and outdoor use.
• cULus LISTED.
• Connect fixture to a 120 volt, 60 Hz power source. Any other connection voids the warranty.
• Use with only three-wire outdoor extension cords that have three-prong grounding plugs
and grounding receptacles that accept the appliance's plug.
• Ground Fault Circuit Interruption (GFCI) protection is to be provided on the circuit(s) or
outlet(s) to be used for the wet location portable luminaire. Receptacles are available having
built-in GFCI protection and are able to be used for this measure of safety.
• Use only with an extension cord for outdoor use, such as an extension cord of cord type
SW, SW-A, SOW, SOW-A, STW, STW-A, STOW, STOW-A, SJW, SJW-A, SJOW, SJOW-A, SJTW,
SJTW-A, SJTOW, SJTOW-A.
Questions? / ¿Preguntas ? 1-800-334-6871 [email protected]
PACKAGING CONTENTS / CONTENIDO DEL PAQUETE
A. Light head
Cabezal de la lámpara
B. Safety guard
Protección de
seguridad
C. Quick-release knob
Perilla de liberación
rápida
D. Portable light stand
Soporte de la
lámpara portátil
E. Handle
Manija
F. (2) 500 watt quartz halogen bulb
(One located in fixture plus spare
bulb stored in portable stand)
(2) Bombillas de halógeno de
cuarzo de 500 vatios
(un ubicada en lámpara más una
bombilla adicional almacenada en
el soporte de la lámpara portátil)
G. Light bracket
Abrazadera de la lámpara
H. Tripod stand
Soporte del trípode
• The worklight should be located no further than 6 feet from the nearest outlet.
• Disassembling your fixture will void the warranty.
• SAVE THESE INSTRUCTIONS.
ASSEMBLING YOUR FIXTURE
WARNING: Deviation from the assembly instructions
may result in a risk of fire or electric shock.
1. Attach light head (A) to the light bracket (G).
This step will require using (2) light head knobs
with built-in bolts (K), (4) regular washers (J),
(2) lock washers (I), (2) spacers (L) and (2) square
nuts (M) (Fig. 1).
2. Attach the light bracket (G) to the portable light
stand (D) using (2) hex bolts (N) and (2) lock
washers (I) (Fig. 2).
3. Install the safety guard (B) in the light fixture (A)
by inserting one side of the guard (B) between the
frame and the lens. Squeeze the guard (B) until
the other side can be placed between the opposite
side of the frame and lens (Fig. 3).
1
Instruction Manual/ Instrucciones
I. (4) Lock washers
(4) Arandela de seguridad
J. (4) Regular washers
(4) Arandela regular
K. (2) Light head knobs with
built-in bolt
(2) Perillas del cabezal de la
lámpara con perno incorporado
L. (2) Spacers
(2) Espaciadores
M. (2) Square nuts (2) Tuerca cuadrada
N. (2) Hex bolts
(2) Pernos hexagonales
Fig. 1
A
L
K
J
Fig. 2
A
G
N
I
D
Fig. 3
A
B
I M
G
N
I