Luminance Brands Kathy Ireland Home LK53 Serie El Manual Del Propietario página 11

4. Installation on Luminance Brands Fans Having
Two-Piece Die-Cast Switch Housing (continued)
4.6
Carefully tuck all Wires and Connectors into the Switch
Housing (Figure 14) .
Position the Switch Housing Cover/Light Fixture
Assembly onto the Switch Housing and reinstall the
Two Screws (previously removed in Step 4 .2) and
tighten Screws securely (Figure 14) .
WARNING
!
To avoid possible fire or electric shock, be careful not
to pinch wires between switch housing and the cover
plate.
4.7
The Light Fixture Assembly Light Sockets are equipped
to accept Three 4 .5-Watt Candelabra Base B11 LED Light Bulbs (supplied) (Figure 15) .
To Install the Three 4 .5-Watt Candelabra Base B11
LED Bulbs into the Sockets, twist the Bulbs Clockwise
to secure (Figure 15) .
WARNING
!
To avoid possible fire hazard, do not exceed wattage
indicated on the fixture.
To complete the installation of your Light Fixture
continue to the "Final Installation" section of this
manual.
SWITCH
HOUSING
SWITCH
HOUSING
COVER
LIGHT FIXTURE
ASSEMBLY
REINSTALL
SCREWS (2)
Figure 14
LIGHT FIXTURE
ASSEMBLY
LIGHT SOCKETS
Figure 15
11
4.5-WATT
CANDELABRA BASE
B11 LED LIGHT
BULBS (3)
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: PH334