Tabla de contenido
Enlaces rápidos
GT2454F
Operator's Manual
WARNING:
Read this Man u al and follow all Warnings
and Safety Instructions. Fail ure to do so
can re sult in serious in ju ry.
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine.
The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty.
01.13.2021 CL
115 90 50-27 Rev. 3
Printed in the U.S.A.
Tabla de contenido
Manuales relacionados para RedMax GT2454F
Resumen de contenidos para RedMax GT2454F
- Página 1 GT2454F Operator's Manual WARNING: Read this Man u al and follow all Warnings and Safety Instructions. Fail ure to do so can re sult in serious in ju ry. Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine.
-
Página 2: Safety Rules
SAFETY RULES Safe Operation Practices for Ride-On Mowers DANGER: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. • Be alert and turn machine off if a child enters the area. WARNING: In order to prevent ac ci den tal •... - Página 3 SAFETY RULES Safe Operation Practices for Ride-On Mowers III. SLOPE OPERATION • Never remove gas cap or add fuel with the engine running. • Allow engine to cool before refueling. WARNING! When loading or unloading • Never fuel the machine indoors. this machine, do not exceed the maximum •...
-
Página 4: Tabla De Contenido
PRODUCT SPECIFICATIONS CONGRATULATIONS on your purchase of a new tractor. It has been designed, engineered and manu fac tured to give you the best possible dependability and performance. Gasoline Capacity 4 Gallons/15,14 L and type: Regular Unleaded Should you experience any problem you cannot easily remedy, please contact your nearest authorized service Oil Type: SAE 10W30 (above 32°F/0°C) -
Página 5: Assembly
UNASSEMBLED PARTS Slope Sheet Battery Keys (1) Oil Drain Tube (2) Hex Bolts (1) Quick Connect Key(s) (2) Nut Keps Seat (3) Bolt (1) Knob (1) Cup (3) Flat Washer (1) Seat Washer *Installed by Dealer *Brush Guard Kit ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. - Página 6 ASSEMBLY CONNECT BATTERY (See Fig. 1) INSTALL SEAT (See Fig. 2) Adjust seat before tightening adjustment knob. WARNING: Do not short battery ter mi nals by allowing a wrench or any other object • Pivot seat upward and remove from the unit. Remove to contact both terminals at the same the cardboard and foam packing and discard.
- Página 7 ASSEMBLY ✓ NOTE: You may now roll your tractor off the skid. Continue CHECKLIST using the instructions that follow to remove the tractor from the skid. BEFORE YOU OPERATE YOUR NEW TRAC TOR, WE WARNING: Before start ing, read, un der stand and fol- WISH TO ENSURE THAT YOU RECEIVE THE BEST low all in struc tions in the Op er a tion section of this man u al.
-
Página 8: Operation
OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. REVERSE NEUTRAL HIGH CHOKE FAST SLOW IGNITION SWITCH ENGINE ENGINE ENGINE DIFFERENTIAL CLUTCH/ PARKING MOWER MOWER START LOCK BRAKE PEDAL BRAKE HEIGHT LIFT... - Página 9 OPERATION KNOW YOUR TRACTOR READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. Fig.
- Página 10 OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor or per form ing any ad just ments or repairs. We rec om mend standard safety glasses or a wide vision safety mask worn over spectacles.
- Página 11 OPERATION TO ADJUST MOWER CUTTING HEIGHT TO USE CRUISE CONTROL (J) (See Fig. 7) (See Fig. 9) The cruise control feature can be used for forward travel only. The position of the attachment lift lever (A) determines the cutting height. Fig.
- Página 12 OPERATION TO OPERATE MOWER • Look down and behind before and while backing. • Slowly depress reverse drive pedal to start movement. Your tractor is equipped with an operator presence sensing • When use of the ROS is no longer needed, turn the switch.
- Página 13 OPERATION TO START ENGINE (See Fig. 3) TOWING CARTS AND OTHER AT TACH MENTS When starting the engine for the fi rst time or if the engine Tow only the attachments that are recommended by and has run out of fuel, it will take extra cranking time to move comply with specifi...
- Página 14 OPERATION PURGE TRANSMISSION MOWING TIPS • DO NOT use tire chains when the mower hous ing is CAUTION: Never engage or disengage free- attached to tractor. wheel lever while the engine is run ning. • Mower should be properly leveled for best mowing performance.
-
Página 15: Maintenance Schedule
MAINTENANCE BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE MAINTENANCE SCHEDULE EACH SEASON STORAGE HOURS HOURS HOURS HOURS Check Brake Operation Check Tire Pressure Check Operator Presence and ROS Systems Check for Loose Fasteners Check/Replace Mower Blades Lubrication Chart Check Battery Level Clean Battery and Terminals Clean Debris off Steering Plate Check Transaxle Cooling... -
Página 16: Maintenance
MAINTENANCE TRACTOR BLADE CARE For best results mower blades must be kept sharp. Re place Always observe safety rules when per form ing any bent or damaged blades. main te nance. BRAKE OPERATION CAUTION: Use only a replacement blade ap- proved by the manufacturer of your tractor. - Página 17 MAINTENANCE TRANSAXLE COOLING TO CHANGE ENGINE OIL (See Fig. 17 & 18) The transmission fan and cooling fi ns should be kept clean Determine temperature range expected before oil change. to assure proper cooling. All oil must meet API service classifi cation SJ-SN. Do not attempt to clean fan or transmission while engine •...
- Página 18 MAINTENANCE CLEANING AIR FILTER Your engine will not run properly using a dirty air fi lter. • Clean engine, battery, seat, fi nish, etc. of all foreign Service air cleaner more often under dusty conditions. matter. CLEAN AIR SCREEN • Clean debris from steering plate.
- Página 19 MAINTENANCE DECK WASHOUT PORT (See Fig. 21) Your tractor’s deck is equipped with a washout port as part of its deck wash system. It should be utilized after each use. 1. Drive the tractor to a level, clear spot on your lawn, near enough to a water spigot for your garden hose to reach.
-
Página 20: Service And Adjustments
SERVICE AND ADJUSTMENTS WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER VICE OR AD JUST MENTS: • Depress brake pedal fully and set parking brake. • Place attachment clutch in “DISENGAGED” position. • Turn ignition key to “STOP” and remove key. •... - Página 21 SERVICE AND ADJUSTMENTS • From right side of mower, fi rst insert 90° end of anti-sway • ATTACH REAR LIFT LINKS (C) - Lift rear corner of bar (S) into hole in transaxle bracket (T), located near mower and position slot in link assembly over pin on left rear tire in front of transaxle.
- Página 22 SERVICE AND ADJUSTMENTS TO LEVEL MOWER FRONT-TO-BACK ADJUSTMENT (See Figs. 32 & 33) IMPORTANT: Deck must be level side-to-side. Ensure tires are properly infl ated to the PSI shown on tires. If tires are over or under infl ated, it may affect the appear- To obtain the best cutting re sults, the mower blades should ance of your lawn and lead you to think the mower is not be adjusted so the front tip is 1/8"...
- Página 23 SERVICE AND ADJUSTMENTS TO CHECK BRAKE MOWER DRIVE BELT INSTALLATION (See Fig. 35 & 36) NOTE: For ease in installing the deck belt, refer to the If tractor requires more than fi ve (5) feet (1,5 m) to stop at routing decal on the cutting deck.
- Página 24 SERVICE AND ADJUSTMENTS TO REPLACE MOTION DRIVE BELT FRONT WHEEL TOE-IN/CAMBER (See Fig. 37) Your new tractor front wheel toe-in and camber is set at the factory and is normal. The front wheel toe-in and camber Park the tractor on level surface. En gage parking brake. are not adjustable.
- Página 25 SERVICE AND ADJUSTMENTS INTERLOCKS AND RELAYS TO REMOVE CABLES, REVERSE ORDER - • BLACK cable fi rst from chassis and then from the fully Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting. charged battery.
-
Página 26: Storage
STORAGE ENGINE Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. FUEL SYSTEM IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS WARNING: Never store the trac tor with FROM FORMING IN ES SEN TIAL FUEL SYSTEM PARTS SUCH gas o line in the tank inside a building AS CARBURETOR, FUEL FIL TER, FUEL HOSE, OR TANK... -
Página 27: Troubleshooting
TROUBLESHOOTING PROBLEM CAUSE CORRECTION 1. Out of fuel. 1. Fill fuel tank. Will not start 2. Engine not “CHOKED” properly. 2. See “TO START ENGINE” in Operation section. 3. Engine fl ooded. 3. Wait several minutes before attempting to start. 4. - Página 28 TROUBLESHOOTING PROBLEM CAUSE CORRECTION Engine continues to 1. Faulty operator-safety presence control 1. Check wiring, switches and connections. If not run when operator system. corrected, contact an authorized service center/ department. leaves seat with attachment clutch CAUTION: DO NOT operate machine until engaged problem is corrected.