Tapping - ALFRA ROTABEST 80SP RL-E Manual De Instrucciones

TAPPing

With the quick-change tapping adapter, there is the possibility to tap threads from M3 up to M 30.
• Insert the quick-change tapping adapter (1) in the arbor of the machine. Make sure it fits in tightly.
• Mount the tap (3) in the tap insert (2).
• Now mount the tap insert (2) including tap (3) in the quick-change tapping adapter (1).
• Adjust the motor to the corresponding cutting speed.
when stopping the forward motion proceed as follows:
• Switch off motor.
• Turn the switch to "L" (left)
• Turn motor on
• Lead back tap to original position
• Switch motor off after tap is completely led back.
The motor rotates only in left and right direction after turning the
switch to L (left) or R (right). If the switch is left on "0", no rotational
movement of the machine will occur.
Make sure the tap is placed
exactly on the drill hole.
19