TECshow NAVIGATOR SPLIT 8 Manual De Usuario página 10

7. FIXTURE LINKING
You will need a serial data link to run light shows
of one or more fixtures using a DMX-512 control-
ler or to run synchronized shows on two or more
fixtures set to a master/slave operating mode. The
combined number of channels required by all the
fixtures on a serial data link determines the number
of fixtures the data link can support.
Important: Fixtures on a serial data link must be
daisy chained in one single line. To comply with the
EIA-485 standard no more than 30 devices should
be connected on one data link. Connecting more
than 30 fixtures on one serial data link without the
use of a DMX optically isolated splitter may result in
deterioration of the digital DMX signal.
Maximum recommended DMX data link distance:
100 meters Maximum recommended number of
movingheads on a single DMX data link: 32 fixtures.
Data Cabling
To link fixtures together you must obtain data
cables. You can purchase DAP Audio certified DMX
cables directly from a dealer/distributor or con-
struct your own cable. If you choose to create your
own cable please use data-grade cables that can
carry a high quality signal and are less prone to
electromagnetic interference.
DAP Audio Certified DMX Data Cables
• DAP Audio cable for allround use. bal. XLR/M
3 p. > XLR/F 3 p. Ordercode FL01150 (1,5m.),
FL013 (3m.), FL016 (6m.), FL0110 (10m.), FL0115
(15m.), FL0120 (20m.).
• DAP Audio cable for the demanding user with
exceptional audio-qualities and connector
made by Neutrik®. Ordercode FL71150 (1,5m.),
FL713 (3m.), FL716 (6m.), FL7110 (10m.).
P. 10
Tecshow Navigator Split 8 | English version