Ceado E7 Manual De Uso Y Mantenimiento página 29

GB
2
Choose the suitable press diameter (53, 54,5 or 57,5 mm) for the filter-holder of your coffee
machine and fix it to the rod of the telescopic press (1, Fig. 14).
3
Position the long support fork supplied with the telescopic press and fasten it using the same
retaining screws of the short fork removed previously (2, Fig. 14).
4
Position the telescopic press and fasten it with the screws provided (3, Fig. 14).
5
Correctly tighten the retaining screws of both the telescopic press (1, Fig. 15) and the new fork
(2, Fig. 15).
Return the appliance to the working position (Fig. 16).
TROUBLESHOOTING
(See Table on the next page)
In case of any malfunction, defect of the appliance or if you suspect any breakage after a fall, unplug
the appliance immediately.
If you are unable to solve the problem referring to the table below, contact an Authorized Service
Centre.
Only qualified experts should repair the appliance.
We are not liable for any damage caused by repairs not made correctly and/or by unauthorized
personnel. In these cases the warranty does not apply.
29