Volume; Loudness; Db (Sound Coordinate); Audio Control - Kenwood KRC-21SA Manual De Instrucciones

General features

Volume

Increasing Volume
Press the [u] button.
Decreasing Volume
Press the [d] button.
Attenuator
Turning the volume down quickly.
Press the [ATT] button.
Each time the button is pressed the Attenuator turns ON or OFF.
When it's ON, the "ATT" indicator blinks.

Loudness

Compensating for low and high tones during low volume.
Press the [LOUD] button for at least 1 second.
Each time the button is pressed for at least 1 second the
Loudness turns ON or OFF.
When it's ON, "LOUD" indicator is ON.

dB (Sound Coordinate)

You can recall the best sound setting preset for different types of
the music.
1
Select the source to set
Press the [SRC] button.
2
Enter Control mode
Press the [AUD] button.
3
Select the Sound type
Press the [#1] — [#5] button.
Press button Sound setting
[#1] Flat
[#2] Rock
[#3] Pops
[#4] Jazz
[#5] Easy
When the dB(Sound Coordinate) setting is changed, the Bass and
Treble set in audio control replace the dB(Sound Coordinate) values.
4
Exit Control mode
Press the [AUD] button.

Audio Control

1
Select the source for adjustment
Press the [SRC] button.
2
Enter Audio Control mode
Press the [A.ADJ] button for at least 1 second.
3
Select the Audio item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed the items that can be adjusted
switch as shown below.
4
Adjust the Audio item
Press the [4] or [¢] button.
— 6 —
Display
"DB-1"
"DB-2"
"DB-3"
"DB-4"
"DB-5"