HAEGER HC-WR3.007B Instrucciones De Uso página 7

– To avoid the risk of electric shock, the appliance must not be immersed in liquid
or even allowed to come into contact with liquid.
– Do not use abrasives or harsh cleaning solutions.
– If necessary, the housing may be wiped with a dry, lint-free cloth.
Trimming comb and trimming blade
– After each use, use the cleaning brush to remove the hair between
the trimming comb and the trimming blade.
1. Remove the comb attachment.
2. Press the shaving head towards the back and remove it.
3. Brush out the shaving head insert (it is the area behind the
shaving head when it has been removed).
4. Reinsert the shaving head by inserting the latch of the shaving
head into the groove of the casing.
5. Press the shaving head back into the casing, until it engages
audibly.
Oiling the cutting head
Oil the cutting blades from time to time if you use the trimmer regularly. Use non-
corroding oil, for example machine oil.
1. Remove the comb attachment used.
2. Apply one to two drops of oil between the cutting teeth.
3. Turn the clipper briefly on and then off again to distribute the oil
4. Remove any excess oil by wiping with a cloth.
If the power becomes weak after a brief period
– Load the rechargeable battery pack, if necessary operate the trimmer with the
mains adaptor.
If the hair clipper pulls on hair
Clean and oil the cutting blades or replace with a new one.
Instructions manual
English
5