Equipment Identification; Door Opening - Costan TWIST NEXT Instrucciones Para El Usuario

Modello - Modèle - Model
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante

10. EQUIPMENT IDENTIFICATION

• Located on the plate affixed to the machine to detect the technical data.
• Check the model and power supply voltage before carrying out any operation.
• If discrepancies are found, immediately contact the manufacturer or the company that supplied the equipment.
1. Manufacturer
2. Code
3. Conformity marking
4. Power supply voltage (V)
5. Power supply frequency (Hz)
6. Absorbed electrical power (W)
7. Absorbed electrical power in defrosting (W)
8. Light max. power (W)
9. Gross volume
10. Type and quantity of refrigerant
11. Climate class
It is strictly forbidden to remove, tamper with the plate and change or alter the data
contained in it.

11. DOOR OPENING

Warning!
MAXIMUM ANGLE OF DOOR OPENING = 115°
For correct working of the torsion bar and to avoid any break of the door or of the
hinge do not exceed the maximum angle of door opening i.e. 115°.
12. POSITIONING
The equipment is equipped with one-directional wheels and adjustable feet.
To stop and position the equipment, screw in or out the feet 10 mm lower than the wheels.
It is strictly necessary after positioning to stabilise the equipment on the ground.
TWIST NEXT
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
1
6
5
4
7
8
9
*Example of data plates
Key nr° 12
1 8 / 6 0
PAGE
UM000488
N° DOC
2
10
11
11
3
Stop the cabinet by feet.
MAX
115°