Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3. ATTAcH cRoSS RAIlS AnD coVeR RAIlS To FRonT enD RIB
A. Assemble 2 Cover Rails using parts as shown.
B. Assemble 3 Cross Rails using parts as shown.
C. Connect the Cross Rails to the End Rib at the ShelterLocks.
D. Place a Cover Rail at each leg and secure it with a Cover Clamp as shown. Slide the Cover Rails so they
are 8 inches up from the ground. Only HAND-TIGHTEN these bolts!
ShelterLock II
connections use #03032 (1
®
Assemble Cover Rails
A
13345
800163
No Bolt at this connection
Assemble Cross Rails
B
10115
800599
800599
01010
4. connecT MIDDle RIB To FRonT enD RIB
ShelterLock II
connections use #03032 (1
®
Cross Rails face toward the inside of the shed.
/
7
") Bolts. Cover Rail Clamp connections use #10115 (1
8
Cross Rails
/
7
") Bolts. Cover Rail Clamp connections use #10115 (1
8
800939
13201
800939
Cover Rails
noTe:
The bolt heads at
the end ribs must be facing
outward to avoid damaging
your cover.
800939
800939
Page 5
ShelterLock II
c
800939
Cross Rail
End Rib Cover Rail Clamps
D
Cover
Rail
Middle Rib Cover Rail Clamps
13201
10115
Cover Rail
01011
01010
noTe:
13201
are from the inside.
/
5
") Bolts.
8
End Rib Connection
®
03032
01010
End Rib
13202
10115
01011
01010
/
5
") Bolts.
8
Middle
Rib
All detail views
05_70435_70437_0B
Tabla de contenido
