Tabla de contenido
Idiomas disponibles
Idiomas disponibles
number exceeds 24 digits, the last 24 digits will be stored to memory.
Press <TALK> key. You will hear the dial tone.
Press the <LNR> key. The number you last called is dialed automatically.
4.1.4 Redial one of the last 3 numbers dialed – in Standby Mode
Press the <LNR> key. The number you last called appears on the display. If you would like to dial
one of the last 3 numbers dialed, press the < ! > or < " > key to select the desired number
appears on the display. Press the <TALK> key, the number shown on the display is dialed
automatically. After finishing your call, press the <TALK> key again to hang up.
Remark: <LNR> key can be used as <! > or < " > key to toggle the last 3 numbers dialed.
4.1.5 Storing redial number to memory
Select your favour redial number that you want to store
Press and hold the <PHBK> key for 2 seconds
The space after the last digit of the redial number will blink, and you can then edit the redial
number.
After editing the redial number, press the <PHBK> key again.
Enter the memory location (00 to 09) where you want to store the number
Press the <PHBK> key again to confirm and to go back to standby mode
4.2 Incoming Calls
When a call comes in, the handset will start to ring. Press the <TALK> key to answer the incoming
call.
4.3 Activate / Deactivate Hands-free Function
This function allows you to communicate without having to pick up the handset. When you are on
the phone, press the <SPK> key to activate the hands-free function. Press the same key to
deactivate the hands-free function.
4.4 Programming a memory number
You can program 10 indirect numbers (of max. 24 digits) in the phone's memory.
Press and hold the <PHBK> key until the
Enter the telephone number you wish to store
Press the <PHBK> key again to confirm
Enter the memory location (00 to 09) where you want to store the number
You will hear a confirmation tone and the
4.5 Calling a memory number
Press the <PHBK> key, followed by the number of the memory location (00 to 09)
Press the <TALK> key. The memory number will be dialed automatically.
Press the <TALK> key again when you want to terminate the call.
4.6 Mute Function
It is possible to deactivate the microphone during a conversation. Now you can speak openly
4
icon blinking on the display
icon will disappear
Tabla de contenido
