Hot Surface Indicator Light; Kitchen Timer - GE Monogram ZHU30 Manual Del Propietário

Using the
kitchen
timer
Hot surface
indicator
light
16
NOTE: Use the kitchen timer to measure cooking time
or as a reminder. The kitchen timer does not control
the cooking elements.
1 Touch the TIMER ON/OFF pad.
2 Touch the (+) or (-) pad to choose the desired
number of minutes. When the (+) or (-) pad is held
for several seconds, the timer will increase or
decrease at a faster rate. The timer will
automatically start to count down the minutes
you have selected within 5 seconds of the last
entry. The display will show the minutes and
.
a " " will flash.
3 The timer displays minutes remaining until it
reaches one minute. At one minute, the timer
display changes to seconds and displays the
seconds remaining.
When the timer counts down to zero time (00)
remaining, the timer will signal with a long beep
for three seconds and the display will flash "00".
The flashing display will continue and a double
beep will be heard every 10 seconds until you
touch the TIMER ON/OFF pad. After 5 minutes, the
flashing display and signal will be deactivated.
Touch the ON/OFF pad to turn the timer off at any
time. Touch (+) or (-) to add or subtract to the set
time.
A HOT SURFACE indicator light (one for each cooking
element) will glow immediately when any element is
activated. The indicator light(s) glow when the glass
surface is hot, and will remain on until the surface
has cooled to a temperature that is safe to touch.
Using Your Cooktop
Induction Cooktop