Tabla de contenido
Idiomas disponibles
Idiomas disponibles
FR PRO can be downloaded from www.fracarro.com.
Minimum requirements for the system:
•
Dotnet Framework v.2 or later
•
Windows XP Service Pack 2 or later (Windows Vista and 7)
Using the FRPRO software, you can create a configuration of the clusters (initial channel and end channel,
channel type, cluster level, etc.) and of the other inputs by working from the computer. The configuration file
will be saved in a USB pen drive and then it will be loaded into the Profiler unit and/or a copy of the configu-
ration can be saved onto the hard disk.
Use the Print function to print the configuration.
Note:
To program the Profiler, you can neglect the settings relevant to the input and output levels as the Profiler
unit is equipped with the self-alignment function that automatically sets these gain values in order to equalize
the level of all clusters by optimizing the noise figure and the output level of all signals. See paragraph 5.4.
After launching the FR PRO software, set the product model that you want to program. Select the "File -
New" menu and choose the product model you want to program from the pop-up window.
The following is a description of the FR PRO software window:
Led di indicazione di abilitazione della tensione per ingresso UHF
LED to show that the voltage is enabled for the UHF input
con indicazione della tensione selezionata
indicating the selected voltage
FM input gain
Regolazione
adjustment
guadagno
ingresso FM
6. PROGRAMMING SOFTWARE
B.III+DAB input gain
Regolazione guadagno
adjustment
ingresso B.III+DAB
Setting the clusters on the
Impostazione dei cluster
sulla banda UHF
UHF band
37
Association of the clusters to
Associazione dei cluster
the UHF inputs
agli ingressi UHF
Regolazione guadagno
AUX input gain
ingresso AUX
adjustment
Tabla de contenido
