Speedaire 6Z899B Manual De Instrucciones De Operación

Operating Instructions & Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Speedaire
Description
Speedaire paint tank is designed for large volume projects using spray guns, paint
rollers and other application equipment. The tank is capable of holding 2.5 gallons
of bulk paint or a 1 gallon can of paint may be placed directly inside the tank.
Basic construction of the unit consists of a heavy deep drawn one piece stainless
steel tank, die cast aluminum tank lid, eyebolt clamps, and a plastic protective
sleeve. The unit is equipped with a pressure regulator, gauge, safety relief valve,
and air line connectors. A convenient carrying handle allows attachment of the unit
to the rung of a ladder or scaffolding to facilitate elevated painting operations.
Safety Guidelines
This manual contains information
that is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols.
Danger indicates an
imminently
hazardous situation which, if not
avoided, will result in death or serious
injury.
Warning indicates a
potentially
hazardous situation which, if not
avoided, could result in death or serious
injury.
Caution indicates a
potentially
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
Specifications
Capacity Tank Dimensions
1 Gallon can or 2.5 8.25 inch Dia. x 11.5
Gallon bulk inch H
Form 5S3107
Paint Tank
®
Unpacking
After unpacking the unit, inspect
carefully for any damage that may have
occurred during transit. Tighten fittings,
bolts, etc., before putting unit into
service.
Do not operate unit
if damaged during
shipping, handling or use. Damage may
result in bursting and cause injury or
property damage.
General Safety Information
CALIFORNIA PROPOSITION 65
You can create dust when
you cut, sand, drill or grind
materials such as wood,
paint, metal, concrete,
cement, or other masonry. This dust
often contains chemicals known to
cause cancer, birth defects, or other
reproductive harm. Wear protective
gear.
This product or
its power cord may
contain chemicals known to the State
Overall Dimensions
10 inch x 10 inch x
14 inch
Printed in U.S.A.
02433
Version 1
04/2014
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
GENERAL SAFETY INFORMATION
Since the paint tank and other
components used, (air compressor,
material pump, spray guns, filters,
lubricators, hoses, etc.) make up a high
pressure pumping system, the following
safety precautions must be observed at
all times:
1. Read all manuals
included with this
product carefully. Be
thoroughly familiar
with the controls and
the proper use of the equipment.
2. Follow all local electrical and safety
codes, as well as in the United
States, the National Electrical Code
(NEC) and the Occupational Safety
and Health Act (OSHA).
3. Do not pressurize tank over 50 psi.
4. Do not exceed the pressure rating of
any component in the system.
5. Be certain that pressure regulator
and safety valve are clean and in
proper working order before using
the paint tank.
6. Be certain that the air supply line is
at zero psi and pressure regulator is
turned off before connecting tank
to air supply.
7. Make sure all feed line, eyebolts and
Maximum Working
Weight (Empty) Pressure
10 lbs. 50 psi
IN233802AV 1/13
6Z899B
E
N
G
L
I
S
H
MANUAL
E
S
P
A
Ñ
O
L
F
R
A
N
Ç
A
I
S