Maintenance Tips - Bugaboo bee3 Manual De Instrucciones

important information
• Check the safety of the Bugaboo Bee³ before each use. Ensure that the seat
fabric, the brake and the safety belts are all working properly, the handlebar is
locked and that the seat is fitted correctly to the chassis.
• Check to see if the Bugaboo Bee³ is damaged. You should ensure that any
damaged or worn parts are repaired immediately.
• To ensure completely safety for your child do not use the Bugaboo Bee³ until any
damaged or worn parts have been repaired or replaced.
• The Bugaboo Bee³ seat unit (no. 500210) should only be used with the Bugaboo
Bee³ chassis (no. 500100AL01 or 500100ZW01). Do not use Bugaboo Bee³ parts
or components with any non-approved pushchair, other device or any other
Bugaboo product.
• Do not use the Bugaboo Bee³ near open flames or other sources of heat. Avoid
exposing the Bugaboo Bee³ to extreme temperatures.
• The Bugaboo Bee³ is not resistant to salt water.
• Avoid Velcro contact to the Bugaboo Bee³ fabrics.

maintenance tips

These tips will help you take care of your Bugaboo Bee³ and ensure a smooth ride.
• Periodically remove the swivel wheels and brush off any dirt or sand. Use
a brush and water to clean dirt off the wheels. Do not submerge the wheel
bearings in water.
• Use a soft brush to clean sand and dirt off the chassis. Take care to brush dirt
away from rotating or sliding parts.
• Clean the chassis with a soft towel and lukewarm water and wipe off any
remaining water with a dry cloth.
• Use a sponge, warm water and liquid soap to gently rub off any dirt on the
handlebar foam. Wipe clean any soap residue left on the handlebar.
• Store your Bugaboo Bee³ and its accessories in a dry place and leave them
unfolded when wet to prevent mould.
For more tips on how to maintain your Bugaboo Bee³, visit bugaboo.com.
10