Idiomas disponibles
Idiomas disponibles
Problem
The appliance is not working at all.
The normal operating sound changes or
becomes louder.
Water is collecting on the bottom of the
unit.
Transporting the appliance
The unit must only be transported in its vertical position.
Do not tilt it any more than 45°. During transport, ensure that the unit is properly secured
and protected against shock, vibration and shifting.
Disposal
This appliance has been manufactured from recyclable materials. After removing the
plug from the wall socket, the unit should be rendered unusable by cutting off the
power cord before disposing of it through special waste collection points in
accordance with local regulations. The refrigerant and the chemical agent in the insulation
foam must be disposed of through a competent agency. Take special care not to damage the
cooling circuit before the unit is handed over for such disposal.
Guarantee
This product is guaranteed against defects in materials and workmanship for a period of two
years from the date of purchase. Under this guarantee the manufacturer undertakes to
repair or replace any parts found to be defective, providing the product is returned to one of
our authorised service centres. This guarantee is only valid if the appliance has been used in
accordance with the instructions, and provided that it has not been modified, repaired or
interfered with by any unauthorised person, or damaged through misuse.
This guarantee naturally does not cover wear and tear, nor breakables such as glass and
ceramic items, bulbs etc. If the product fails to operate and needs to be returned, pack it
carefully, enclosing your name and address and the reason for return. If within the guarantee
period, please also provide the guarantee card and proof of purchase.
Possible cause and solution
- There is a power failure
- The main fuse has blown.
- The temperature control is set to '0'.
- The fuse in the wall socket (if
applicable) has blown. This can be
checked by connecting another
electrical device to the socket and
checking for function.
- Check for proper positioning (uneven
floor?).
- Are any adjacent objects affected by
the running of the cooling unit (i.e.
causing them to vibrate?)
- Are there any objects on top of the unit
which might be vibrating?
The melt-water drain system is blocked.
Remove the blockage and clean the
system.
16
