Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 85
7 Manual Seal (Schweißen): two functions:
To seal the open end of a bag without vacuuming air function
When the "Vacuum & Seal" function is in operation, this button stops the motor pump and
immediately starts to seal the bag so that less vacuum pressure inside the bag can be
controlled by the operator to avoid crushing for delicate items.
8 Hose port: To insert the hose for vacuuming canister or wine stopper.
9 Cancel: To cancel each vacuum or sealing process.

16.2 Appliance diagram

10 Vacuum chamber: Position the open end of the bag inside the chamber.
11. Lower gasket + 14. Upper gasket
12 Sealing profile: Presses the bag tightly onto the sealing bar (17).
13. Handle: Press down to lock the cover. And lift to open the cover.
15 Cutter: To cut the bags.
16. Air intake: Air intake connects with vacuum chamber and pump. Do not cover this air
intake when placing bag for Vacuum&Seal operations.
17 Sealing bar:
Contains a heating wire covered with teflon which allows the bag to
seal but not to stick to the strip. Place the bag over this sealing element.
Please note
► Do not remove the Teflon tape.
WARNING
Please observe the following safety notice to reduce the risk of burns.
► Never touch the sealing bar while the unit is operating.
caso FastVac 1000
38
Tabla de contenido
loading

Tabla de contenido