The Display Is Subdivided Into Three Parts; Time And Date Setting - Ravelli WHISPER 9 SUPER Manual De Uso Y Mantenimiento

Rev.0 18/07/2019

The display is subdivided into three parts:

Pag.61
EN
1. It shows the current room temperature measured by the handheld set. Moreover, if you press the DOWN scroll key you will
1
The display is subdivided into three parts:
The display is subdivided into three parts:
display the temperature settings that can be changed using the two UP/DOWN keys. Any change made is confirmed automatically
within 3 seconds from the change or by pressing the confirmation key. A sound signal indicates that the change has been con-
1. It shows the current room temperature measured by the handheld set. Moreover, if you press the DOWN scroll key you will
1
Handheld touch radio initialization
1. It shows the current room temperature measured by the handheld set. Moreover, if you press the DOWN scroll key you will
firmed. 1
display the temperature settings that can be changed using the two UP/DOWN keys. Any change made is confirmed automatically
In order to operate correctly, the handheld set should be interfaced with the electronic board installed inside the stove. For this
display the temperature settings that can be changed using the two UP/DOWN keys. Any change made is confirmed automatically
within 3 seconds from the change or by pressing the confirmation key. A sound signal indicates that the change has been con-
1
reason, on display appears the following message: within 3 seconds from the change or by pressing the confirmation key. A sound signal indicates that the change has been con-
firmed.
firmed.
2
In the inactive phases (combined with the 3rd part of the display) indicates the state of the stove.
If the handheld set is used for the first time, select YES using the selection keys and confirm with the dedicated key. On the display
In the active phases, it indicates the operating power of the stove.
2
of the handheld set appears the following:
In addition, by pressing the DOWN scroll button, you can display the power settings, that can be edited using the two scroll
2
In the inactive phases (combined with the 3rd part of the display) indicates the state of the stove.
keys
3
2
In the inactive phases (combined with the 3rd part of the display) indicates the state of the stove.
In the active phases, it indicates the operating power of the stove.
UP/DOWN: The confirmation of any change takes place automatically within 3 seconds from the change or by pressing the con- In the active phases, it indicates the operating power of the stove.
In addition, by pressing the DOWN scroll button, you can display the power settings, that can be edited using the two scroll
firmation key. A sound signal indicates that the change has been confirmed. In addition, by pressing the DOWN scroll button, you can display the power settings, that can be edited using the two scroll
keys
keys
UP/DOWN: The confirmation of any change takes place automatically within 3 seconds from the change or by pressing the con-
UP/DOWN: The confirmation of any change takes place automatically within 3 seconds from the change or by pressing the con-
firmation key. A sound signal indicates that the change has been confirmed.
firmation key. A sound signal indicates that the change has been confirmed.
Hold down for a few seconds the button of radio communication (RADIO ADJ) of the PCB, located on the back of the stove, to
initialize the device.
3
3
3

Time and date setting

Below are given the steps for accessing the relative menu.
Time and date setting
Time and date setting
Below are given the steps for accessing the relative menu.
Below are given the steps for accessing the relative menu.
MANUFACTURER
ENGINEER
Press the key "access menu" to
access
the
MENU page
Press the key "access menu" to
Press the key "access menu" to
access
access
the
the
MENU page
MENU page
SETTINGS
DATE-TIME
ENABLE EXT. TH.
CONTRAST
FW VERSION
ADJUST
LANGUAGE
Press the key
"confirm" to
access the
Press the key
SETTINGS
Press the key
"confirm" to
page
"confirm" to
access the
access the
SETTINGS
SETTINGS
page
page
User's manual HANDHELD TOUCH RADIO
User's manual HANDHELD TOUCH RADIO
Use and maintenance manual Whisper 9 super
User's manual HANDHELD TOUCH RADIO
MENU
USER
MENU
MENU
USER
USER
MANUFACTURER
MANUFACTURER
ENGINEER
ENGINEER
Press the key
"confirm"
to access the
USER page
Press the key
to access the
SETTINGS
SETTINGS
DATE-TIME
DATE-TIME
ENABLE EXT. TH.
ENABLE EXT. TH.
CONTRAST
CONTRAST
FW VERSION
FW VERSION
ADJUST
Press the key "con-
ADJUST
LANGUAGE
firm"
LANGUAGE
to access the page
DATE-TIME
Press the key "con-
to access the page
DATE-TIME
USER
SCREW FEEDING
CHRONOTHERMOSTAT
USER
USER
AIR-PELLET SET
SCREW FEEDING
STOVE STATE
SCREW FEEDING
CHRONOTHERMOSTAT
CHRONOTHERMOSTAT
AIR-PELLET SET
AIR-PELLET SET
STOVE STATE
STOVE STATE
Press the key
"confirm"
"confirm"
to access the
USER page
USER page
Press the key "con-
firm"
firm"
to access the page
DATE-TIME
Press the increase key to change every single value
Press the increase key to change every single value
Press the increase key to change every single value
Press the increase key to change every single value
Press "confirm" to confirm the settings and switch to the next
Press the increase key to change every single value
Press the increase key to change every single value
value.
Press "confirm" to confirm the settings and switch to the next
Press "confirm" to confirm the settings and switch to the next
value.
By pressing the key "back" for several times you will display value.
the stand-by page.
By pressing the key "back" for several times you will display
By pressing the key "back" for several times you will display
the stand-by page.
the stand-by page.
Vers. 01 of:07.04.14
Pag.21
Vers. 01 of:07.04.14
USER
COMFORT CLIMA
SETTINGS
USER
COMFORT CLIMA
COMFORT CLIMA
SETTINGS
Press the key "selection" for
"selection"
to switch to the second page
of USER MENU and select
Press the key "selection" for
SETTINGS.
Press the key "selection" for
"selection"
"selection"
to switch to the second page
to switch to the second page
of USER MENU and select
of USER MENU and select
SETTINGS.
SETTINGS.
Vers. 01 of:07.04.14
Pag.21
Pag.21
USER
SETTINGS