Failed Ignition; Operating Mode; Description Of The Display - Ravelli Mia 90 Manual De Uso Y Mantenimiento

Failed ignition

If the system does not detect the ignition of the flame within the preset time, operation will be blocked with the "No ignition" alarm.
Before relighting the stove, check that there are pellets in the hopper, that the door and ash drawer compartment are closed, that
there are no obstructions to the combustion air inlet system and above all that, in models without self-cleaning brazier, the brazier is
empty, clean and correctly positioned. If the problem persists, it could be due to a technical problem (ignition plug, adjustments, etc
⚠
...), so please contact a Ravelli CAT.
The accumulation of unburned pellets in the brazier after a failed ignition must be removed before proceeding with a new
⚠
ignition.
⚠
The brazier could be very hot: danger of burns!
Never empty the brazier inside the hopper.

OPERATING MODE

The pellet cooker is designed to operate in two different modes: heating mode or cooking mode.
In heating mode the cooker works as a normal pellet stove whose function is to heat the surrounding environment. In this way, you
can choose the operating power and the desired room temperature.
In this mode you can also use the cooker top as a cooktop. For fast cooking of foods it is recommended that you set the maximum
power and place the pot on the oven in cast iron placed above the combustion chamber.
In cooking mode, the cooker is designed to cook meals in its oven.
In this mode, the control system adjusts the combustion power to bring the oven to the desired temperature and maintain it. You can
also activate the electric grill either with the cooker on or off. The latter function is convenient to use the oven as a food warmer even
in hot weather.
The operating mode can be selected from the following screen, which is accessible from the home page (see next sections) by
pressing the button

Description of the display

The main screen of the display differs depending on the operating mode of the cooker.
In HEATING MODE the home page looks like below.
The display is subdivided into three parts:
1. It shows the current room temperature measured by the handheld set.
In addition, by pressing the DOWN scroll button, you can display the temperature settings, that can be edited using the two
scroll keys UP/DOWN. Any change made is confirmed automatically within 3 seconds from the change or by pressing the con-
firmation key. A sound signal indicates that the change has been confirmed.
2. View the operating power of the cooker.
In addition, by pressing the DOWN scroll button, you can display the power settings, that can be edited using the two scroll
keys UP/DOWN. The confirmation of any change takes place automatically within 3 seconds from the change or by pressing
the confirmation key. A sound signal indicates that the change has been confirmed.
3. View the state of the cooker.
Use and maintenance manual Mia 90
3
Choose cooking or heating with keys
Confirm the selection with the key
Rev.2 03/03/2021
Pag.32
1
2