Tabla de contenido
Idiomas disponibles
Idiomas disponibles
WARNING: Improper use or failure to follow instructions can result in explosive failure causing
serious eye or other injury. For safe use of this product you must read and follow all instructions. Do
not leave a pressurized sprayer in the hot sun. Heat can cause pressure build-up resulting in possible
explosion. Do not store or leave solution in tank after use. Always wear goggles, gloves, long sleeve
shirt, long pants and full foot protection when spraying. Never use any tool to remove pump if there is
pressure in sprayer. Never stand with face or body over top of tank when pumping or loosening pump to
prevent ejecting pump assembly and/or solution from striking and injuring you. Never pressurize sprayer
by any means other than original pump. Do not attempt to modify this sprayer. Replace parts only with
manufacturer's original parts. This sprayer is designed for use with bleach solutions only. Never use
or mix bleach or solutions containing bleach with other household chemicals such as toilet bowl
cleaners, rust removers, acids or ammonia containing products. Never spray flammable, acidic,
caustic or other corrosive solutions or heat, pressure, or gas producing chemicals. Always read and
follow chemical manufacturer's instructions before use with this sprayer as some chemicals may be
hazardous when used with this sprayer.
• PRE-USE CHECK: Before each use check tightness of hose nut to be sure hose is
securely attached to the shut-off assembly. Insure hose is securely attached to the
pump outlet by tightening hose nut. Insure that all nozzle and wand connections
are tight. Insure the three bolts (underside of base) used to attach the piston
cylinder are tight.
• Do Not exceed a tank solution temperature of 120º F/ 49º C.
NOTE: The tank and hose may have residual water in it due to quality testing
performed on the sprayer.
WARNING
CAUTION
1E
Sk-1157-1
Tabla de contenido
