Specifications - Rockford Fosgate Pro Serie Manual De Instrucciones

S
PECIFICATIONS
MODEL- PUNCH (Pro Series)
Maximum Power Rating
All Channels
Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts
4Ω Load Per Channel
2Ω Load Per Channel
4Ω Load Bridged (Mono)
Dimensions: (with Endbell)
Height
Width
Length
Battery Fuse Rating (Amp)
(External to Amplifier)
Fuse Type
Signal-to-Noise Ratio
Crossover Slope
Crossover Frequency
Frequency Response
Bandwidth
Damping Factor @ 4Ω (at output connector )
Slew Rate
IM Distortion (IHF)
Acceptable Signal Voltage Range
Protection
Equalization (45Hz Punch Bass)
Input Impedance
Specifications subject to change without notice
12
301SP
900 Watts
75 Watts x 2
150 Watts x 2
300 Watts x 1
2.38" (6.05cm)
9.85" (25.02cm)
11.07" (28.12cm)
30A
ATC
NOMAD - Internal analog-computer output protection
circuitry limits power in case of overload. Thermal
switch shuts down the amplifier in case of overheating.
401SP
1200 Watts
100 Watts x 2
200 Watts x 2
400 Watts x 1
2.38" (6.05cm)
9.85" (25.02cm)
11.07" (28.12cm)
40A
ATC
>100dB A-weighted
12dB/octave Butterworth
variable from 50Hz to 250Hz
20Hz to 20kHz ±0.5dB
20Hz to 200kHz ±3dB
>200
30 Volts/ms
<0.05%
Variable from 100mV to 6V (RCA Input)
Variable from 0.5V to 11V (High Level Input)
Variable from 0dB to +18dB @ 45Hz
20k ohms