Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1.It requires accomplishing "preparation before operation" step by step described in the instructions
before sewing.
2.Different stitches of ordinary sewing can be selected by the function adjustment wheel whose numbers
are corresponding to the figure shown on functions indication panel (3), enabling you to choose different
stitches according to different needs. Please refer to the following Figs for more information.
Straight sewing
It requires adjusting the function adjustment wheel (2) to function 1 . 2 or 3 for straight sewing.
1. Rotate counterclockwise the hand wheel (24), shown in Fig1.
2. Rotate counterclockwise the hand wheel (24) to lift the pinpoint of sewing needle (16) above the
presser foot (17), shown in Fig2.
3. Adjust the function adjustment wheel (2) to function 1.2 or 3, shown in Fig.
4.Move presser bar lifter(20) upward, lift presser foot (17) and pull the bobbin thread and upper thread
backward for about 10cm, shown in Fig4.
5. Put texture under the presser foot (17) and move presser bar lifter(20) downward to hold the texture,
shown in Fig5.
6.Turn power switch (25) "ON" and stamp foot switch (31) gently to start sewing, shown in Fig6.
P-8
Tabla de contenido
