Idiomas disponibles
Idiomas disponibles
PACKAGE CONTENTS
A
Electrical ratings:
12 Vca 2.5 W
Read and follow all the instructions of security and operation
before using this product
Use this lamp with:
AC Transformer
Model: 67850
Brand: Hampton Bay
Assembly and Installation
1
Attaching and installing the
light
IMPORTANT: Do not install the light within 10 ft.
(3 m) of a pool, spa, or fountain.
□
Attach the light (A) to the post (B) by inserting
the bottom of the light (A) into the top of the
post (B) and twisting it clockwise.
□
Attach the post (B) to the stake (C) by
inserting the bottom of the post (B) into the
top of the stake (C) and twisting clockwise.
□
Push the stake assembly into the ground by
grasping the post. Do not push on the light.
D
NOTE: Do not use a hammer. If the ground is
hard, use water to soften or a trowel to loosen
the soil.
B
A
B
C
Part
Description
A
Light
B
Post
C
Stake
D
Connector
2
Connecting the wires
IMPORTANT: Protect the wiring by routing it in
close proximity to the light, fitting, or next to a
building structure such as a house or a deck.
IMPORTANT: Do not bury the wiring by more
than 6 in. (15.24 cm) in order to connect to the
main secondary wire.
IMPORTANT: Do not submerge in water. This
product could be damaged.
CAUTION: The wire from the low voltage power
unit shall be 14-18AWG type underground Low
Energy Circuit Cable.
□
Mount the wire connector (D) to the lead wire from a
transformer (not included) by twisting the top of the wire
connector (D) off in a counterclockwise direction and
connecting the two wires.
□
Twist the top of the wire connector (D) back on in a
clockwise direction.
□
Repeat this step for each light assembly.
1
Item #116 807
Model #66933
Use and Care Guide
Low Voltage LED Path Light
C
D
Please contact 01-800-004-6633 for further assistance.
D
Quantity
1
1
1
1
HOMEDEPOT.COM.MX
