Tabla de contenido
Idiomas disponibles
Idiomas disponibles
FEATURES
HANDLE
The plastic handle (A) has an internal swivel
for smooth rotation. Easily attaches to the
hose reel with the supplied fasteners.
AIR LINE INLET
The air line inlet (C) is 1/4"
NPT and is located on the on
the mounting plate that is
attached to the hose reel.
MOUNTING BRACKET
The mounting bracket (D) is a
powder coated metal plate that
can be easily mounted on a wall
and comes with a quick release
pin (E) for remote use.
AIR LINE OUTLET
The air line outlet (F) is 1/4" NPT and
is located on the end of the air hose
(G) for convienient connection to air
accessories or tools.
AIR HOSE
The air hose (G) is 3/8" x 50' and is
attached to the hose reel.
MANUAL BRAKE PIN LOCK
The manual brake pin lock (H) is a
convienient feature located on the
backside of the hose reel. This is to lock
the hose in place when only a short
amount of hose is needed or unlock to
allow for free rotation.
LEAD-IN HOSE (not shown)
The lead-in hose is 3/8" x 3' long and has a swivel connection on
one end to prevent the hose from twisting or kinking. This gets
attached to the air line inlet (C).
ASSEMBLE THE HOSE REEL
Attach the swivel handle to
the front flange of the hose
reel using the supplied
screws, washers and
locknuts. Insert the screws
into the hose side of the
hose reel flange, place the
handle onto the flange,
place 2 washers onto the
screws and tighten the
locknut securely on the
end using a 10mm wrench
and a phillips head
screwdriver.
6
Tabla de contenido
