Warning Icons - stayer ROSE710 Manual De Instrucciones

Refill fuel before to start the machine. Do not unscrew
the combustible tank cap while the engine is running or
engine is hot.
Ensure the petrol cap is correctly closed whilst you use
the machine. Ensure you close the petrol cap correctly
after refilling.
Store excess petrol and oil in homologated recipients in
accordance with European normative.
Do not use petrol that has been stored for over two
months. Petrol that has been stored for too long will make
the start up of the machine more complicated and will
cause the engine to underperform. If the petrol has been
in the machines petrol deposit for a period exceeding two
months, remove and substitute the petrol before using the
machine.
USE AND CARE OF THE MACHINE
Only cut hedges. Do not use this machine for
other uses for which the machine has not been
designed to carry out. For example: do not use
this machine to cut plastic parts, bricks or construction
materials. Do not use this machine to move objects.
The usage of this machine for jobs other than those
for which the machine has been designed, could lead
to dangerous situations.
Use this machine, accessories and all its parts
according to the instruction manual and taking into
account working conditions and working area. The use
of this machine for jobs different to those specified
in the instruction manual can cause dangerous
situations.
Check that all security elements are in good working
order at all times. Remember user is the responsible of
danger and accidents caused to other people or things.
The manufacturer will not be liable for damages caused
through the incorrect usage of the machine.
The sharp cutting tool is very dangerous. If instructions
are not followed it will result in serious injury.
Keep all parts of your body away from the cutting tool
during operation Do not overload the machine. Use
the machine for its correct usage. If used correctly the
machine will do the desired job.
Look after the machine. Check that all moving parts are
well aligned and that they are not blocked, that there are
no broken pieces or other conditions that could affect the
proper functioning of the machine.
If this machine is damaged, always repair it before using it
again. Most accidents occur because of poor maintenance.
Maintain the cutting elements sharp and clean. The cutting
elements if sharp and clean will cut better, do a better job,
have less chance of getting tangled and easier to control.
Maintain the handles of the machine dry and clean.
Handles that are not clean and dry cause these to be
slippery and a consequent loss of control over the machine.
If your machine accidentally takes a knock, inspect the
machine carefully. If the blade bends, the cover break so
if you see any other issue that could affect the functioning
of the machine, take the machine to your nearest after
sales service.
ENGLISH
31
Switch off the machine, unplug the spark plug
and make sure the cutting tool is stopped before
carrying out any adjustments to any part of the
machine, refuelling, cleaning, transport or
storage the machine. Such security measures reduce
the risk of accidental start up.
If the machine starts vibrating in a strange way, disconnect
the machine and examine it. If you cannot detect why
the machine vibrates, take the machine to your nearest
service dealer. Vibrations are always an indication of a
problem to the machine.
Reduce the throttle setting during engine shut down and,
if the engine is provided with a shut-off fuel valve, turn the
fuel off when engine is stopped.
BACK PULL
When the blades contact with a solid object in the critical
zone a dangerous reaction can be produced.
This reaction is denominated backward movement. As a
result, the user could lose control of the hedgecutter and
serious or mortal injuries can be produced.
These forces occur due to an improper use of the machine
and/or because of the incorrect interpretation of the
instruction manual and can be avoided by following these
simple instructions:
1. There shouldn´t be any fences, posts, cables or rocks
near the blades to avoid the backward movement, as
well as possible damages to the blades.
2. When using the hedgecutter hold it by the handle.
3. Do not lose visual contact with the hedgecutter.
If necessary, move the accelerator to slow motion posi-
tion.
4. When using the hedgecutter do not place it near your
feet or over your shoulder level.
MAINTENANCE
Take your machine for periodic revision to a qualified
after sales dealer and only use original spare parts
and accessories. This will guarantee that the security
measures of this machine can always be complied with.

WARNING ICONS

To ensure a secure maintenance you will find the following
symbols on the machine.
Attention, danger!
Read the manual and follow its warning and
security instructions.
It is necessary to use eye and acoustic protection
at any time.
Wear protective gloves to work.
31