Bosch Professional GSR 14,4 V-EC FC2 Manual Original página 11

OBJ_BUCH-2041-002.book Page 11 Monday, January 12, 2015 10:35 AM
 Use the battery only in conjunction with your Bosch
product. This measure alone protects the battery against
dangerous overload.
 The battery can be damaged by pointed objects such as
nails or screwdrivers or by force applied externally. An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
Additional Safety and Working
Instructions
 Dusts from materials such as lead-containing coatings,
some wood types, minerals and metal can be harmful to
one's health and cause allergic reactions, lead to res-
piratory infections and/or cancer. Materials containing
asbestos may only be worked by specialists.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the
materials to be worked.
 Prevent dust accumulation at the workplace. Dusts can
easily ignite.
 Before any work on the machine (e. g., maintenance,
tool change, etc.) as well as during transport and stor-
age, set the rotational direction switch to the centre
position. Unintentional actuation of the On/Off switch can
lead to injuries.
 The battery is supplied partially charged. To ensure full
battery capacity, completely charge the battery in the
battery charger before using for the first time.
 Read the operating instructions of the battery charger.
 Apply the power tool to the screw only when it is
switched off. Rotating tool inserts can slip off.
 Adjust the gear switch only when the machine is at a
complete stop.
 Always push the gear selector through to the stop. Oth-
erwise, the machine can become damaged.
 To save energy, only switch the power tool on when using
it.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Symbol Meaning
GSR 14,4 V-EC FC2/GSR 18 V-EC FC2:
Cordless Drill Driver
Grey-marked area: Handle (insulated
gripping surface)
Bosch Power Tools
Symbol Meaning
Article number
Read all safety warnings and all
instructions
Before any work on the machine itself,
remove the battery
Always wear ear protection.
Movement direction
Reaction direction
Drilling and screwdriving
Low speed
High speed
Switching On
Switching Off
Right/left rotation
Battery Capacity
U Rated voltage
n 1 No-load speed (1. gear)
0
n 2 No-load speed (2. gear)
0
M Maximum torque according to ISO 5393
Metal
Wood
Ø Drilling diameter, max.
Ø Max. screw dia.
Chuck clamping range
Tool holder
Weight according to EPTA-Procedure
01/2003
English | 11
1 609 92A 14Z | (12.1.15)