Kicker KMW10 Manual Del Propietário página 3

Altavoz para sonidos graves
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Infi nite Baffl e Mounting: The infi nite baffl e mounting
method effectively utilizes the storage space of
most boats. Use caution when mounting speakers
through any panel of the boat. Please be aware of
wiring harnesses, springs, hinges, and folding seat
mechanisms that may interfere with the operation of
the boat or speaker system. Mark the panel for the
hole cut-out diameter of the subwoofer and cut the
hole.
B
A
These enclosure recommendations have been calculated with the airspace inside the enclosure
and include the displacement of the woofer.
Model:
KMW10
1.0 ft
3
[28.3L] Power Handling = 150W RMS
Panel Dimensions for Sealed Minimum Enclosure using 3/4" [1.9cm] thick Marine Grade Plywood:
Model:
Volume | ft
3
KMW10
1.0 [28.3]
More Box Building Notes: Use 3/4" (1.9cm) or thicker Marine Grade Plywood and seal the joints
with silicone. Use the "template" inside your KM subwoofer's shipping carton to mark the mounting
hole, then cut directly on the line. These designs need internal bracing. Add triangular bracing
between each of the larger unsupported panels.
Pro Tip: You are one KXM Amplifi er and a few cables away from a complete, high-quality system
with rock-solid bottom end as only available from KICKER! Please ask your dealer about KICKER
KXM amplifi er upgrades.
2014 KM Sub Rev C.indd 3
2014 KM Sub Rev C.indd 3
Sealed Enclosures: The KM subwoofer generates
more sound pressure than competing marine
subwoofers on the market and excels when used
in sealed boxes. These sealed enclosure designs
give the smoothest response with increased energy
at the lowest frequencies, 20 to 40Hz, delivering
massive amounts of highly-accurate bass.
KM subwoofers perform well in any size sealed
C
enclosure between the minimum and maximum
volume recommendations. These systems will
exhibit benefi ts of both designs: Smaller enclosures
will produce tight punchy bass, while the larger
enclosures will deliver extended low-frequency
performance.
Sealed Minimum
[L]
Panel A | in [cm]
13.5x13.5 [34.3x34.3]
Storage Space
Sealed Maximum
2.4ft
3
[68.0L] Power Handling = 150W RMS
Panel B | in [cm]
Panel C | in [cm]
13.5x12 [34.3x30.5]
12x15 [30.5x38.1]
3
11/6/2013 3:58:19 PM
11/6/2013 3:58:19 PM
Tabla de contenido
loading

Tabla de contenido