WMF SKYLINE Instrucciones De Uso página 11

Descaling
Limescale deposits lead to losses of energy and impair the service life of the
device. It shuts off prematurely if the limescale layer is too thick. It can then only
be removed with great difficulty. Therefore descale regularly.
We recommend using durgol
You can find this where the device was purchased, in select speciality stores or
you can order it directly from wmf consumer electric.
Prior to descaling, unplug the device and allow it to cool. Remove the strainer
and place on the base of the kettle. Replace the strainer after descaling has
finished. Fill with 1 to 2 cups of durgol
limescale layer on the bottom is removed. Then fill the device with cold tap water
to cover the limescale ring on the wall and allow to stand for 15 minutes. Then
pour out and thoroughly rinse with cold tap water.
Do not heat the solution during descaling.
Attention: there is no claim under warranty for damages caused by not observing
the descaling instructions.
Causes for malfunctions
▪ If the pouring behaviour worsens/diminishes:
check the strainer and descale/clean the strainer if necessary
▪ Device switches off before boiling:
Bottom of the pot is too strongly calcified, it is not filled with enough water
▪ Device does not switch off:
Lid is not closed
▪ Device will not switch on:
The device has not sufficiently cooled down following operation with no or
too little water.
If it is not possible to fix this problem, submit the device for repair.
® universal. This is highly effective and non-abrasive.
® universal and leave the device until the
11