wilux AQUATRONIC Manual De Instrucciones página 21

Keyboard functioning (infrared receiver)
Activate the keyboard by pressing the key ON/OFF @@. The keyboard will be activated
only if the system is under tension (Led
Led @ will be illuminated. To deactivate the keyboard and all functions press the key
ON/OFF @@ again.
All functions (except for the clock and the blower) cannot be activated if there is not
enough water in the bathtub (Led
activated without enough disinfection liquid in the tank (signalled by Led @@).
Regulation of the clock
To regulate the hour, press the key CLOCK/REGULATION HOURS
indicating the hour will start blinking. Then press the same key several times until the right
value has been reached. Press the key CLOCK/REGULATION MINUTES
to memorize this value.
To regulate the minutes, press the key CLOCK/REGULATION MINUTES
numbers indicating the minutes start blinking. Then press the same key several times until
the right value has been reached. Press the key CLOCK/REGULATION HOURS
one time to memorize this value.
The following functions can be activated and deactivated directly from the infra-red
receiver:
PUMP
Press the key ON/OFF PUMP @@. The symbol
AIR
Press the key ON/OFF AIR @@. The symbol
be activated only if the pump is active. If the function air is active and the pump will be
switched off, the function air will be deactivated automatically.
BLOWER (starts with minimum speed)
Press the key ON/OFF BLOWER @@. The symbols
TEMPERATURE
Press the key INDICATION TEMPERATURE @@. The temperature will be visualized on the
display of the clock.
@ is illuminated). When activating the keyboard
òò is not illuminated). The disinfection cycle cannot be
@@ will be illuminated.
@@ will be illuminated. The function air can
@@@@
21
@@ until the numbers
@@ only one time
@@ until the
@@
will be illuminated.
only