Impact Wrench; Ec Declaration Of Conformity - Chicago Pneumatic CP7735 Serie Manual Del Operador

EN
English
INSTRUCTION MANUAL
This product is designed for installing and removing threaded
fasteners in wood, metal and plastic. No other use permitted. For
professional use only.
Air Supply Requirements
1. Supply tool with 90 psig (6.2 bar) of clean, dry air. Higher
pressure drastically reduces tool life.
Maximum air pressure Pmax = 6.3 Bar
Minimum air pressure Pmin = 4 Bar
2. Connect tool to air line using pipe, hose, and fitting sizes
shown in the diagram.
1/2" (12mm)
3/8" (10mm)
Lubrication
1. Use an air line lubricator with SAE #10 oil, adjusted to two (2)
drops per minute. If an air line lubricator cannot be used, add
air motor oil to the inlet once a day.
2. Use 1/3oz. (10ml) of CP Pneu-Lube Synthetic Clutch Grease
8940158455.
Operation
1. The intended use of this impact wrench is with impact rated
sockets operating upon threaded fasteners. To operate, pull
trigger on handle. To operate in forward rotation, push the
reverse pin. To operate in reverse, pull the reverse pin.
2. This impact wrench is equipped with a regulator to enable
adjustment of output power in forward position only. In
reverse position the tool always runs at maximum power,
there is no regulation.
Maintenance
1. After first year, disassemble and inspect air motor and
impacting clutch every three (3) months if the tool is used
every day. Replace damaged or worn parts.
2. High wear parts are underlined in the parts list.
3. To keep downtime to a minimum, the following service kits are
recommended:
Tune-Up Kit 8940165883
(Incl: 16, 30, 35, 40, 41 )
Repair Kit 8940165884
(Incl: 16, 30, 35, 37, 38, 39, 40, 41 )
Tune-Up Kit 8940167479 (CP7735H)
(Incl: 16, 30, 35, 40A, 41A )
Repair Kit 8940167480 (CP7735H)
(Incl: 16, 30, 35, 37, 38, 39A, 40A, 41A )
Copyright 2009, Chicago Pneumatic Tool Co. LLC
All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks,
model denominations, part numbers and drawings. Use only authorized parts. Any damage or malfunction caused by the use of
unauthorized parts is not covered by Warranty or Product Liability.
1/2" (12mm)
CA048362 (1/2")
1/2" (12mm)
1/2" (12mm)
1/2" (12mm)
CA048360 (1/2")
CA048361 (1/2")

EC DECLARATION OF CONFORMITY

We, Chicago Pneumatic Tool Co. LLC, 13325 Carowinds Blvd., NC 28273 USA, declare
under our sole responsibility that the product to which this declaration relates, is in
conformity with the requirements of the Council Directive of June 1998 on the
approximation of the laws of the Member States relating to machinery (98/37/EC).
Machine Name CP7735 Series Impact Wrench
Machine Type Assembly Power Tool for Threaded Fasteners - No
other use is permitted.
Serial No. Tools from No. 2009 001
Technical Data
3/8" (10mm) Sq. Dr. Std.(CP7735)
1/2" (12.7mm) Sq. Dr. Std.(CP7735H)
Rated speed 10000 RPM
Torque range 19-220 ft.-lbs. (26-300 Nm)
Max torque @ 90 psi 300 ft.-lbs. (407 Nm)
Air pressure 90 psi (6.2 bar)
Air Consumption 7.0 l/s (14.8 cfm)
Maximum air pressure Pmax = 6.3 Bar
Minimum air pressure Pmin = 4 Bar
Mass = 2.55 lbs (1.15 Kg)
Harmonized Standards Applied EN792-6
National Standards Applied ISO 8662-7, ISO 15744-2002
Name And Position Of Issuer Bruno Blanchet, General Manager
Signature Of Issuer
Date Of Issue April 15, 2009
Noise & Vibration Declaration*
The different models of CP7735 & CP7735H impact wrenches, from
our company, have the following features regarding sound level.
Impacting sound level dB(A)
Model ISO 15744-2002
Pressure
CP7735
94.1 **
CP7735H
CP7735Q
85.7 **
CP7735HQ
Free speed sound level dB(A)
Model ISO 15744-2002
Pressure
CP7735
95.7 **
CP7735H
CP7735Q
82.3 **
CP7735HQ
For making estimates of daily vibration exposures, useful information may be
found in CEN/TR 15350: 2006, "Mechanical vibration - Guideline for the
assessment of exposure to hand-transmitted vibration using available
information including that provided by manufacturers of machinery"
**Uncertainty 3 dB(A)
* These declared values were obtained by laboratory type testing in
compliance with the stated standards and are not adequate for use in risk
assessments. Values measured in individual work places may be higher than
the declared values. The actual exposure values and risk of harm experienced
by an individual user are unique and depend upon the way the user works,
the workpiece and the workstation design, as well as upon the exposure time
and the physical condition of the user. We, Chicago Pneumatic, cannot be
held liable for the consequences of using the declared values, instead of
values reflecting the actual exposure, in an individual risk assessment in a
work place situation over which we have no control.
CP7735 Series

Impact Wrench

Vibration level
ISO 8662-7
2
Power m/s
105.1 **
3.9
96.7 **
3.9
Vibration level
ISO 8662-7
2
Power m/s
106.7 **
3.9
93.3 **
3.9