ProKlima FN-114522.1 Manual De Instrucciones página 23

FN-114522.1 & FN-114522.2
PARTS DESCRIPTION
1. Main body (Fan guard + Fan blade)
2. Speed switch
3. Base
OPERATING INSTRUCTIONS:
1. Plug the power cord into a suitable socket.
2. The fan is switched on by rotating the speed switch on its back: 0 = OFF, I = Low Speed, II = Medium speed,
III = High speed.
3. Tilting Angles: push or pull the guards to adjust the angle of airflow.
4. After use, rotate the speed switch back to "0" and unplug the appliance.
CLEANING
1. Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains
cable from the socket.
2. Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it down
with a damp cloth and then dry it carefully. Always take out the mains plug first.
3. Take care that excessive dust does not build up in the air-intake and air-outlet grille, and clean it
occasionally using a dry brush or vacuum cleaner.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50Hz
Power consumption: 45W
Recycling – European Directive 2012/19/EU
This marking indicates that this product should not be disposed with other household wastes. To
prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of material resources. To return your used device,
please use the return and collection systems or contact the retailer where the product was purchased. They can
take this product for environmental safe recycling.
- 22 -
GBR