Know Your Water Pump - Briggs & Stratton WP15-225 Manual Del Operario

KNOW YOUR WATER PUMP

Read this operator's manual and safety rules before operating your water pump.
Compare the illustrations with your water pump, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
Priming Plug
Discharge Outlets
Pump Chamber
Suction Inlet
Water Drain Plug
Air Cleaner — Protects engine by filtering dust and
debris out of intake air.
Choke Lever — Used when starting a cold engine.
Discharge Outlets — Connect discharge hose here.
Engine Information (not shown) — Stamped on valve
cover. Provides model, type and trim number of engine.
Please have these readily available when calling for
assistance.
Fuel Shutoff Valve — Used to turn fuel supply on and
off to engine.
Fuel Tank — Capacity of one (1) U.S. gallons.
Oil Fill Cap — Check and fill engine with oil here.
On/Off Switch — Set this switch to "On" before using
starter handle. Set switch to "Off" to switch off engine.
FEATURES AND CONTROLS
Choke Lever
Air Cleaner
Starter Handle
Engine Speed Lever
Fuel Tank
Fuel Shutoff Valve
Serial Number Label
Priming Plug — Fill pump with water here to prime
pump before starting.
Pump Chamber — Be sure to fill with water before
starting.
Serial Number Label — Provides model, revision and
serial number of water pump. Please have these readily
available when calling for assistance.
Starter Handle — Used to start the engine.
Strainer Basket (not shown) — Used to limit passage
of abrasive materials into the pump.
Suction Inlet — Connect reinforced suction hose here.
Engine Speed Lever — Used to adjust engine speed to
control pump output.
Water Drain Plug — Remove to drain water from pump
and flush internal components with clean water.
5
Oil Fill Cap
On/Off Switch