Front Runner FAJT001 Manual Del Usario página 7

FIT AND SECURE
2
2.10
13
8
Rear Of Vehicle
3 FIT AND SECURE
2.1
2.4
3.1
3.2
2
3
4
2.2
5
3.3
Center the rack and tighten fully. Use M8 Nut Caps (Item 5) to finish off the nuts.
FAJT001 / FAJT002_REV_A00
4
7
11
12
7
Place the Foot Rail (Item 1) onto the Spacers
and secure using M6 x 40 Hex Bolts, M6 x 30
x 2 Flat Washers, M6 x 12 x 1SS Flat Washer
and M6 Nyloc Nuts (Items 7, 8, 11 & 12) as
shown. Do this on both sides of the vehicle.
10mm
Finish off by placing M6 Nut Caps (Item 13)
on all the bolt heads.
Make sure that the wind deflector is installed
before you proceed to the next step.
Refer to Rack Fitment Guide (RRSTUNI).
4MM
For a Full Rack fitment refer to FAJL004
Fitment Guide (Steps 2.1, 2.2, & 2.6).
13mm
Fit your Roof Rack (1/2 Rack shown) to the
Foot Rails using M8 x 20 Hex Bolts, M8 x
16 x 1.6SS Flat Washers and M8 Nyloc Nuts
(Items 2, 3 & 4).
© 2020 FRONT RUNNER VEHICLE OUTFITTERS