Front Runner FAJL002 Manual Del Usuario página 7

3 FIT AND SECURE ROOF RACK
3.1
3.2
2
3
4
5
3.3
Center the rack and tighten fully. Use M8 Nut Caps (Item 5) to finish off the nuts.
REMOVING YOUR RACK
4
4.1
FAJL002 / FAJL003_REV_A01
4
4MM
13mm
22
10mm
4mm
7
Make sure that the wind deflector is installed
before you proceed to the next step.
Refer to Rack Fitment Guide (RRSTUNI).
Fit your Roof Rack to the Foot Rails using
M8 x 20 Hex Bolts, M8 x 16 x 1.6SS Flat
Washers and M8 Nyloc Nuts (Items 2, 3 & 4).
Should you wish to remove your rack,
you will need to plug the holes you
drilled in the roof (Step 2.5) using the
supplied Seal Plug Kit.
Remove the Tray and the Foot Rail by
reversing the installation procedure.
Leave the Foam Washer and the
Aluminum Spacers in place. Screw in the
Sealing Plugs, reusing the M6 Nyloc Nuts
and Washers that held the Foot Rail in
position.
© 2019 FRONT RUNNER VEHICLE OUTFITTERS
13mm