Tabla de contenido
FIT AND SECURE INNER BRACKETS AND FOOT RAIL
2
2.4
2.5
2.6
FAJL002 / FAJL003_REV_A01
4
4mm Pilot Holes
4mm
22mm
4mm
5
Mark the two holes on both the brackets
onto the roof.
Remove the four brackets.
Have a friend hold a vacuum cleaner
with the nozzle attached, close the the
drill point.
Drill pilot holes using a 4mm drill bit on
the eight points marked on the roof.
Change the 4mm drill bit to a 22mm hole
saw. From the outside of the vehicle,
drill all the 4mm holes (8 in total) out to
22mm. Let the drill do the work. You do
not want to scratch or damage your
vehicle's roof. Have your friend hold the
vacuum cleaner underneath where you
are drilling to catch all the dust and
keep your vehicle clean.
After drilling, clean the area around all
the 22mm holes in the roof with a rag
and methylated spirits/denatured
alcohol.
Refit both LH and RH Inner Support
Bracket. Refer to Step 2.2.
© 2019 FRONT RUNNER VEHICLE OUTFITTERS
13mm
Tabla de contenido
