Care And Cleaning - GE G8H0AASSPSS El Manual Del Propietario

Care and Cleaning

Cleaning and Maintenance
Always clean the motor body and blending
shaft thoroughly after using. Remove the
blending shaft from the motor body. Clean the
motor body only with a sponge or damp cloth.
Do not use abrasive cleaners which could
scratch the surface. To clean the blending
shaft, wash by hand in hot water using mild
detergent. Be mindful of the permanently
mounted razor-sharp edges.
CAUTION
SAFETY
NEVER immerse the motor body in
water or other liquids.
When the appliance has malfunctioned
or has been dropped or damaged in any
way or is not operating properly, contact
the manufacturer at the website listed in
the Contact Us section for information on
examination, repair, or adjustment Any
other servicing should be performed by an
authorized service representative.
49-9000008 Rev. 3
FOR YOUR
Chopper/Grinder Attachment
To simplify cleaning, rinse the prep bowl,
cover, and blade immediately after use,
so that food won't dry onto them. Wash
blade ring, plastic sheath, and prep bowl in
warm soapy water. Rinse and dry. Wipe the
underside of the chopper/grinder cover with
a sponge or damp cloth to remove any food.
Do not submerge the cover in water or put
in the dishwasher. Wash the blade carefully.
Avoid leaving it in soapy water where it
could disappear from sight. If you have a
dishwasher, you can wash the prep bowl
blade assembly on the upper shelf. Insert
the prep bowl upside down. Put the blade in
the cutlery basket. Unload the dishwasher
carefully to avoid contact with the sharp
blade. Wipe the motor body and top of the
cover with a damp sponge or cloth. Dry it
immediately. Never submerge the motor
body or the cover in water or other liquid. The
chopper/grinder attachment is intended for
HOUSEHOLD USE ONLY. Any service, other
than cleaning and normal user maintenance,
should be performed by an authorized Service
Representative.
Whisk attachment
To clean your whisk attachment, simply
release the attachment from the motor body
housing. Once the whisk is removed, detach
the metal whisk from the gearbox by pulling
pieces apart. To clean the gearbox, simply
wipe with a damp cloth. To clean the metal
whisk, wash with warm, soapy water or in the
dishwasher. Do not submerge the gearbox in
water or any other liquid.
7