Bronpi VOLGA 130X40 Instrucciones De Instalación, Uso Y Mantenimiento página 31

Replacement of the electrical components
It is necessary to replace or repair some of the electrical components (engine, turbine) it is possible to do it without uninstalling the insert.
Because they are under the base of the insert. It is possible to access to the components through the combustion chamber following the next
steps (see drawing D21).
1. Remove the ceramics pieces from the inside
2. Remove the 4 metal profiles
3. Unscrew the four screws that fix the base to the body
4. Remove the metallic base. From here you have an access to the components.
5. To assemble again follow the steps on the other side.
Placement of the metallic bench
Place the steel profiles in the base of the combustion chamber, as in the images (see drawing D22).
Placement of firebox pieces
Volga 130x40
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS 30
D22
INSERTS
D21