Freeman PF20GLCN Manual Del Usuario página 4

MODEL:PF20GLCN
! WARNING:
The warnings and precautions discussed
above cannot cover all possible
conditions and situations that may occur.
It must be understood by the user that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the user.
UNPACKING
● This tool has been shipped completely
assembled.
● Carefully remove the tool and any
accessories from the box.
● Inspect the tool carefully to make sure no
breakage or damage occurred during
shipping.
●
Do not discard the packing material until you
have carefully inspected and satisfactorily
operated the tool.
●
If any parts are damaged or missing, please
call 1-888-669-5672.
! WARNING:
If any parts are missing do not operate
this tool until the missing parts are
replaced. Failure to do so could result in
possible serious personal injury.
! WARNING:
Do not attempt to modify this tool or
create accessories not recommended for
use with this tool. Any such alteration or
modification is misuse and could result
in hazardous condition leading to
possible serious personal injury.
06
HTTP://WWW FREEMANTOOLS COM
.
FEATURES
SPECIFICATIONS
REQUIRES: 4.30 SCFM with 100 fasteners per
minute @ 90 psi
AIR INLET: 1/4 inch NPT
MAGAZINE CAPACITY:
100 fasteners, 20 gauge
WEIGHT: 3.37 lbs
MAXIMUM PRESSURE: 110 psi
PRESSURE RANGE: 70 psi 110 psi
–
PIN SIZE RANGE:
1" to 1-1/4 " (25mm - 32mm)
0.193" 0.252"
4 9mm . 6.4mm
25mm 25mm
1" 1"
1-1/4" 32mm 1-1/4" 32mm
Compatible with all 20 gauge L cleats from 1 in.
to 1-1/4 in. .
FEATURES
●
360 ADJUSTABLE EXHAUST °
Allows user to direct air away from face
●
OIL-FREE DESIGN
For less maintenance.
ANODIZED ALUMINUM CYLINDER AND
●
MAGAZINE
For long lasting durability.
●
COMFORT-GRIP HANDLE
For increased comfort and control.
● ERGONOMICALLY ENGINEERED BODY
Rugged and Comfortable resulting in a light-
weight tool great for extended use.
AIR FILTER
●
Keeps interior components debris free,
extending tool life.
ADJUSTABLE DEPTH
●
Depth is easily adjustable for various
applications.
OPERATION
ADJUSTING THE EXHAUST
The adjustable exhaust on the cap of the tool allows
users to direct the exhaust according to operator
preference. To adjust the direction, turn the exhaust
cap in the desired direction.
1-888-669-5672
.
MODEL: PF20GLCN
CHANGE THE NOSE COVER
The tool is packed with another regular nose
cover with which can be replaced.
1.
Disconnect the tool from air source.
2. Remove fasteners from the tool. Failure to do
so will cause the fasteners to eject from the
front of the tool.
3.
Pull up on the latch(B) and open the flooring
nose cover (C)
4.
Remove the O-ring (D) and pin (E)
5. Remove the flooring nose cover(C).
6. Pull the regular nose cover (F) on the nose of
the nailer.
7. Put the pin (E) and O-ring (D) back.
8.
Push the latch back to the nose cover on the
nailer's nose.
.
Latch (B)
Flooring nose
cover (C)
O-Ring (D)
Flooring nose
cover (C)
Put the pin (E) and
O-ring (D) back
LOADING FASTENERS
Connect the tool to the air source.
⒈
Push down on the latch button(G). Pull back on
⒉
the magazine cover(H).
Insert a stick of fasteners into the magazine
⒊
rail(I). Make sure the pointed ends of the
fasteners are resting on the bottom ledge of the
magazine when loading. Make sure the
fasteners are not dirty or damaged.
⒋ Push the magazine cover(H) forward until latch
button pops up.
Magazine rail (I)
! WARNING:
The tool may fire when it is first
connected to the air source. Always
connect the tool to the air source before
loading fasteners to prevent injury from
unintended cycling. Always make sure
the tool's magazine is empty at the
beginning of each work session, before
Pin (E)
connecting to an air source.
HTTP://WWW FREEMANTOOLS COM 1-888-669-5672
. .
Latch button (G)
Magazine cover (H)
07