Extel O’MOUV HD Instrucciones De Uso página 94

PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT
AND KEEP THIS MANUAL FOR FUTURE REFERENCE.
The state of art WAPP camera is capable of deliver high quality Digital High Defi nition (HD)
video to your smart-mobile device(s), which would require higher internet bandwidth. Due to
your local internet environment condition, your mobile device(s) may display black-screen or
temporary disconnect to the WAPP camera.
- Make sure the WAPP camera is operating with suffi cient internet bandwidth, 1Mbps (upload/
download speed) is suggested.
- For best performance, the smart-mobile device(s) need to be on Wi-Fi or 4G mobile
network in order to receive maximum download speed.
- When the internet transmission is low, your WAPP APP will automatically switch to Relay
Mode:
• By adjusting to "Better Streaming" in the system setting section may improve the WAPP
APP performance.
- Your internet bandwidth is limited. For best performance, try to avoid more than two users
connecting to the WAPP camera simultaneously.
- Make sure your smart-mobile device(s) is equipped with up-to-date technology, 1.5GHz
dual core processor or equivalent is suggested.
- If the signal strength of your Wi-Fi router is weak, there are several ways to improve trans-
mission:
• Change router/camera relative position to receive better signal.
• Use wire Ethernet cable on the WAPP camera to establish connection between WAPP
camera and your router.
• Use Wi-Fi repeater/extender to maximize the service range of your Wi-Fi route.
• Switch your router to 11b/11g mode in order to improve router service range.
• Purchase extension cable or high gain antenna for your camera from the WAPP
vendor.
- Please make sure the memory card used is CLASS10 rated.
GB1
CFI EXTEL O'MOUV HD - 10/2015