Blind Stitch - IKEA AA-516805-6 Manual De Instrucciones

ENGLISH

Blind stitch

Choose the blind stitch by turning stitch selector dial to either L or M. The
thread tension should be from 1-4. Make sure the presser foot is properly
attached (page 21).
1. Move the needle upwards by turning the hand wheel towards you.
Fold the fabric as shown in picture. Lift up the presser foot and feed
the fabric underneath. Turn the hand wheel towards you to move the
needle down so that the needle just passes through left of the folded
portion of the fabric. Lower the presser foot. Make sure that the top
thread and bobbin thread are pulled towards the back of the machine
under the presser foot.
2. Press the foot control carefully and start sewing.
3. When you have finished, lift the fabric and pull it about 15 cm
backwards. Cut the threads with the thread cutter, leaving them the
right length for when you start sewing the next seam.
TIP! Try sewing on a scrap of fabric first to adjust any settings if
necessary before using the "proper" fabric.
18
Foot Stich Thread
tension
2
1
3