Additional Features; Maintenance, Care And Cleaning - Sunbeam HOSPITALITY 1639 Manual De Instrucciones

With the control setting switch in the
standard 220-volt AC outlet. Select speed (airflow) setting that is most appropriate to
your needs and that will deliver the best results.
The control setting switch marked
speed of the Hair Dryer. Toggle the switch until it clicks into position for the desired
speed.
When finished using the Hair Dryer, move the control switch to the
unplug the cord from the outlet.
The Hair Dryer has three heat settings. To control the heat settings, toggle the switch to
the desired temperature
COOL SHOT BUTTON (Refer to Diagram)
When drying hair use a higher heat setting and switch to a lower heat setting when
drying is nearly complete. To finish, press the Cool Shot Button. This will deactivate all
heat flow from the Dryer and blow cool air to lock in your hairstyle without causing over
drying or damage to your hair.
ROTaTaBLe CONCeNTRaTOR (Refer to Diagram)
The Hair Dryer is equipped with a permanent air concentrator attachment and rotates to
make styling even easier.
Use your SUNBEAm® Hospitality Hair Dryer with care. Directing a high volume of heat
continuously to one area can overheat hair and scalp. When using a High heat setting,
hold the blower opening a few inches away from the hair, drying one section at a time.
Work layers of hair in quick strokes. Keep the dryer in motion until drying and styling
are complete.
1. If the Hair Dryer has been accidentally immersed in water, contact your nearest
authorized SUNBEAm® Hospitality distributor. DO NOT ATTEmPT TO USE THE HAIR
DRYER AGAIN.
2. If the Hair Dryer does not function as described in the test procedure above, contact
your nearest authorized SUNBEAm® Hospitality distributor.

maintenance, care and cleaning

Your Dryer requires no special maintenance or servicing. No lubrication is needed.
Repairs, when necessary, must be performed by a recognized service facility. For proper
operating performance, the DRYER mUST BE KEPT CLEAN. Blocked or clogged air intake
openings will cause the Dryer to overheat.
1. Always unplug Dryer from outlet when Dryer is not in use or when cleaning it.
2. To clean the exterior surface wipe with a slightly damp cloth.
3. To clean the air intake, simply flip the Filter Back open and remove any hair and lint
that may build up.
4. Handle the cord carefully to prevent twisting, pulling or jerking that will damage it.
5. To store or pack Dryer, let it cool to room temperature. DO NOT WRAP THE CORD
AROUND THE DRYER.
to use your Hair dryer
"OFF" position, plug the Hair Dryer into a
"OFF, "
for "LOW" heat

additional features

caution
important information
English - 3
"LOW, " "HIGH" controls the airflow
for "mEDIUm" head and
"OFF" position and
for "HIGH" heat.