Phonic Powerpod 620 PLUS Manual Del Usuario página 9

Ocultar thumbs Ver también para Powerpod 620 PLUS:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Digital Effect Processor
22. Effects On Button and Indicator
(Powerpods, 740, 780, 1062 and 1082 Plus only)
Pushing this button will turn the built-in effect processor on and off.
When the effect processor is activated, the corresponding lED will
light up to indicate so.
23. Program Control
This control will allow users to select one of the 16 built-in digital
effects of the Powerpod powered mixer. The effect names that
correspond with the numbers can be found on the top of the
mixer's face, or in the digital effect table.
24. Parameter Control
Turning this control will adjust the one main parameter of the
selected effect. Each effect's parameter can be found on the
digital effect table.
Master Section
25. EFX To Monitor Control
This controls the level of the processed signal from the built-in
effect processor, that is sent to the Monitor mixing bus.
26. EFX To Main Control
This controls the level of the processed signal from the built-in
effect processor, that is sent to the Main l/R mixing bus.
25
26
27
POWERPOD 620
23
24
22
32
28
/ 740
/ 780
27. AUX In Controls
The Powerpods 620, 740 and 780 Plus feature a single aUX in
control (located beneath the Main Equalizer) that adjusts the final
level of the aUX in input that is sent to the Main mixing bus. The
Powerpods 1062 and 1082 Plus, on the other hand, features 2 aUX
in Controls. One that adjusts the final level that is sent to the Monitor
mixing bus (the upper control), another that controls the final level
that is sent to the Main l-R mixing bus (the lower control).
28. Tape In
The Powerpod 620 Plus features a single Tape in control (located
below the equalizer) that adjusts the final level of the AUX in input
that is sent to the Main mixing bus. The Powerpods 740, 1062 and
1082 Plus, on the other hand, feature 2 Tape in controls. One that
adjusts the final level that is sent to the Monitor mixing bus (the
upper control), another that controls the final level that is sent to
the Main mixing bus (the lower control).
29. Graphic Equalizers
These graphic equalizer allows you to adjust the frequency
response of a signal, with a maximum of ±12 dB of signal boost or
cut for each of the frequencies. The Powepods 740, 780, 1062
and 1082 Plus all feature dual Graphic Equalizers, with the 1062
and 1082 Plus featuring two 10-band equalizers and the 740 and
780 featuring two 7-band equalizers. The Powerpod 620 Plus
features a single stereo 7-band equalizer for both the Main and
Monitor signals. The uppermost equalizer is for alteration of the
Monitor signal (when the EQ switch is in the appropriate position it
becomes the Main left EQ - on the Powerpod 1062 and 1082 Plus
- and the Main 2 EQ - on the Powerpod 740 Plus), where the lower
equalizer is for the Main l-R signal (or the Main Right signal on
Powerpod 1062 and 1082 Plus, Main 2 on Powerpod 740 Plus).
30. EQ IN and Indicator
(Powerpods 740, 780, 1062 and 1082 Plus only)
This button activates the graphic equalizer in which it accompanies.
The corresponding lED indicator illuminates when the EQ is
activated.
31. Rumble Filter (Powerpod 1082 Plus only)
This button activates a rumble filter on channels
1 through 6 to help remove low frequency sounds
that could affect input signals.
32. EQ Select Switch
(Powerpods 740, 780, 1062 and 1082 Plus only)
This switch (featured on the Powerpods 740, 780 1062 and 1082
29
Plus only) enables you to select the way you utilize the pair of
Equalizers on these models. On the Powerpod 1062 and 1082
Plus, when the switch is in the uppermost position it enables you
to use the top equalizer for the Monitor signal, and the bottom
30
equalizer for the Main l/R signal; the lower position enables the
equalizers to be used for the Main left and Right signals. On the
740 and 780 models, the uppermost position is identical to the
1062 and 1082; however the lower position allows the equalizers
to be used for the mixer's Main 1 and 2 signals.
/ 1062
/ 1082
31
9
Tabla de contenido
loading

Tabla de contenido