Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English
8. Invert the blender bottle so that the motor unit is at the top, then remove
the motor unit by pressing the ejection buttons to release it from the
bottle.
9. Remove the cross-blade attachment by twisting it in an anticlockwise
direction and replace it with the sealable flip lid.
Note:
Always ensure that the rubber gasket, located onto the inside bottom
edge of the cross-blade attachment, is in place.
Warning:
Maximum operation time is 1 minute. Allow to cool for 4 minutes
before using the blender again.
Cleaning
Risk of electric shock!
Before you clean the hand blender, unplug the appliance from the power
socket. Under no circumstances may the motor unit be cleaned by immersing it
in water or holding it under running water.
Clean the motor unit, the hand blender, with a moist cloth.
•
After processing very salty food, you should rinse the blades right away.
•
Ensure that water cannot permeate through the openings of the hand
•
mixer. For stubborn soiling use a mild detergent on the cloth.
Clean the rest of the attachment components under running water and dry
•
them off well with a dish towel.
Technical Data
Model No
HB-10C.023A
Voltage
AC 220-240V
Frequency
50/60Hz
Power
1000W
Conformity
This product has been tested and produced according to all relevant current
CE guidelines, such as:
-
Electromagnetic compatibility Directive 2014/30/EU,
-
Low voltage Directive (LVD) Directive 2014/35/EU,
-
RoHS with its amendments Directive (EU) 2015/863,
and has been constructed in accordance with the latest safety regulations.
The CE mark attests this product with all relevant directives.
4
Insulation
Continuous working time
Intermission time
≦1 min
≧4 min
Instructions for use
Tabla de contenido
