Caso HD1000 Manual Del Usuario página 28

2. Place your cup on the removable water tray, make
sure it aligns with the spout.
3. You can select the additional water tray attachment (2)
for various cup sizes.
4. First press about 3-5 seconds.
up.
5. Press to choose your desired temperature and
press to set the water volume.
6. Press to operate the appliance. After 5-10 s, the desired water will flow out
continuously from water spout. Press
obtained. The appliance will stop working at once.
If you want to obtain water again, repeat the steps above.
7.
Please note
► The appliance has a memory function if the plug is still plugged in. The settings, that
were adjusted the last time, are still adjusted. The settings will be reset after unplugging.
► The ambient temperature changes everyday. This leads to different amounts of water. It
can vary up to +- 15%.
3. Water disposal from the water tray
1. When the water tray is full, grasp and stabilize the
appliance by one hand and use the other hand to lift up
the water tray slightly to remove it.
2. Empty the water tray and insert it into the original place.
Make sure it is properly inserted.
4. Replacing the filter
1. Open the tank cover and take out the box with the filter.
2. Remove the old filter and replace it with a new filter (see
fig.).
5. Error code E7
If the appliance stops to operate with a beeping sound and the display shows the error
code E7, it means that there is too little water or no water in the water tank. Please fill in
enough water into the water tank immediately.
Caso Heißwasserbereiter HD1000
and light
again, when your desired amount of water is
28