Jensen VM9413 Manual De Operación página 19

Enter the desired radio station using the on-screen number
pad. Press Enter to tune to the selected station. To exit the
screen without changing the station, touch Exit. To clear your
entry and start over, touch Clear.
HD Radio Multicast Channels
To tune to an HD Radio multicast channel, tune to the main
signal and then press the PROG button (20) on page 2/2 . If a
Multicast channel is being broadcast for the current station,
the corresponding multicasting number appears on the left
side of the screen. To view the title and artist, if available,
select HD-1, HD-2, HD3, etc.
FM 106.7 MHz HD-2
RADIO
WXXL-FM
Auto HD
E
HD-1
Q
HD-2
T
A
HD-3
G
PROG
Title: Lil Love
NOTE: The amount of information displayed when
receiving an HD Radio signal is dependent upon what is
being broadcast. Some stations broadcast their call
letters (name), the artist's name, song title, and category
of music.
PTY Search
After tuning to an HD Radio channel, the Program Type
categories are listed, allowing listeners to find similar
programming by genre.
FM
RADIO
WXXL-FM
E
01 Non-specific
Q
02 News
T
A
03 Information
G
04 Sports
02:27 AM
05 Talk
06 Rock
Title: DAWSON McALLIST
If the PTY menu is not displayed, press the PROG button
MEM (20) on page 2/2 to toggle between HD Radio multicast
channels and PTY categories.
When a PTY category is selected from the touch screen
menu, the radio will start scanning for stations broadcasting
2/2 A/D
in the selected category.
Using Preset Stations
You can store up to 18 presets for FM and 6 presets for AM.
Stored stations appear on the left side of the screen.
Storing a Station
1. Select a band (if needed), then select a station.
2. Touch the on-screen MEM button (17) to open the
preset screen.
Preset: _ _
1
4
7
0
3. Enter the preset number for which you would like to
store the current station (or press EXIT to cancel and
02:07 AM
106.7 MHz HD-1
Auto HD
MEM
PROG 2/2 A/D
2 3
Exit
5 6
8 9
Clear
15
close the menu). The preset number and station
appears highlighted on the left side of the screen.
NOTE: Multicast stations can be stored as preset
stations.
Recalling a Station
1. Select a band (if needed).
2. Touch an on-screen preset button (6) to select the
corresponding stored station.
P1 87.5 MHz
P2 90.1 MHz
P3 98.1 MHz
P4 106.1 MHz
P5 107.9 MHz
P6 102.9 MHz
Auto Store (AS)
To select six strong stations and store them in the current
band:
1. Select a band (if needed).
2. Touch the on-screen AS button or press the AS button
(3) on the control panel to activate the Auto Store
function.
The new stations replace stations already stored in that band.
VM9413