22U Configuration - Tripp-Lite SRWO8U22 Manual Del Propietário

Installation/Wall-Mounting

22U Configuration

Step Using one of the mounting rail tie plates and four of the M5 x 10mm Phillips head
1
screws, connect one set of shorter and longer vertical mounting rails. Repeat this
step for the other set of rails.
Step Insert one end of the combined vertical mounting rails into the corners of the bottom
2
panel frame (both panel frames can be used as a top or a bottom) opposite the
mounting side and secure them with 2 of the M5 x 10mm Phillips head screws on
each side.
Step Insert the other end of the combined vertical mounting rails into the corners of the
3
top panel frame opposite the mounting side and secure them with 2 of the M5 x
10mm Phillips head screws on each side.
Step
Attach the right-side and left-side support straps by securing 8 of the M6 x 12
4
Phillips head screws to the sides of the top panel frame and vertical mounting rails.
Step
Before mounting the rack, find the studs in your wall/mounting surface and make
5
all measurements, and or guide marks in accordance with the configuration you
have chosen (22U).
Step Using user-supplied hardware, mount the top and bottom panel frames to the wall.
6
Both mounting frames can accommodate 5/16" lag bolts.
Note: Mount this configuration with the longer rails towards the bottom.
continued
5
1
2
3
4
16"
(406.4 mm)
6
40.25"
(1022.3 mm)