Tabla de contenido
Idiomas disponibles
Idiomas disponibles
REMOVING
CLOGS
When the hose is clogged
with dust,
remove
it in the following
manner:
1. Pullout the handle by turning the
removal ring in either direction.
2. Remove any clogs in the handle.
Shake
the hose to remove
any clogs.
3. Insert the handle
in place and return the
ring to its original
position.
4. Check the dust filter cover in the dust bin
and clean if necessary (See DUST BIN
CLEANING, page 14).
5. Check the secondary filter and clean if
necessary (See SECONDARY FILTER
CLEANING, page 16).
6. Check exhaust filter and replace if
necessary. (See REPLACING EXHAUST
FILTER,page 15).
CAUTION
Product Damage Hazard
Do not use the hose without the handle in
place. If the hose is used without the
handle, the hose will bend excessively,
causing it to crack.
Remo/val
Ring
CLEANING EXTERIOR AND ATTACHMENTS
1. Turn off and unplug vacuum cleaner. DO
NOT drip water on vacuum cleaner.
2. To clean exterior, or to reduce static
electricity and dust build-up, wipe outer
surface of vacuum cleaner and attach-
ments. Use a clean, soft cloth that has
been dipped in a solution of mild liquid
detergent and water, then wrung dry. Wipe
dry after cleaning.
,_
CAUTION
Do not use attachments if they are wet.
Attachments used in dirty areas, such as
under a refrigerator, should not be used
on other surfaces until they are washed.
They could leave marks.
- 12 -
Tabla de contenido
