Performance Features - Kenmore 116.10701 Manual De Uso Y Cuidado

PERFORMANCE FEATURES
HOSE STAND
The vacuum cleaner with the floor nozzle,
wand, and hose can be stored while still
connected.
NOTE: The wand must be in the shortest
oosition.
_hb WARNING
Personal Injury and Product Damage
Hazard
DO NOT carry the vacuum cleaner while
it is in the storage position. Injury or
damage may result if the hose or
extension pipe becomes unattached.
Wand
Holder
1. Stand the _/
vacuum cleaner
up, align the
arrows on
the
wand and turbine
unit, and insert the
wand holder into
the wand holder Wand
Holder
hole. HoJe
E
2. Hold the hose
and wind it
around the
wand.
THERMAL PROTECTOR
This vacuum cleaner has a thermal
protector which automatically trips to
protect the vacuum cleaner from
overheating. If a clog prevents the normal
flow of air to the motor, the thermal
protector turns the motor off
automatically. This allows the motor to
cool in order to prevent possible damage
to the vacuum cleaner.
To correct problem: Turn off and unplug
vacuum cleaner to allow the vacuum
cleaner to cool and the thermal protector
to reset. Check for and remove clogs, if
necessary. See REMOVING CLOGS (page
12). Also check and replace any clogged
filters. Wait approximately thirty (30)
minutes and plug the vacuum cleaner in
and turn back on to check if the thermal
protector has reset.
- 11 -