Connection Diagram - Alesis MultiMix 6 USB Manual De Inicio Rápido

CONNECTION DIAGRAM

BOX CONTENTS
MultiMix 6 USB
USB cable
Power adapter
Quickstart Guide
Safety Instructions & Warranty
Information booklet
Mic
Guitar
CD Player
Notes:
When recording a guitar or bass with an active pickup, set the MultiMix 6 USB's GUITAR / LINE SWITCH to "LINE." If your
instrument uses a passive pickup, connect it to LINE INPUT 1 and set the switch to "GTR." (You may use a line-level mono
source connected to LINE INPUT 2 at the same time.)
To reduce electrical hum at high gain settings, keep the MultiMix 6 USB's power supply away from your guitar cable and the
MultiMix 6 USB's channel inputs.
AUDIO SETUP
The MultiMix 6 USB is a class-compliant device that can be used with any digital
audio workstation or recording software that supports USB audio. To enable your
MultiMix 6 USB to send and receive audio to and from your computer, follow the
instructions below for your computer's operating system:
WINDOWS VISTA:
1. Go to Start Menu Control Panel
Switch to Classic View, and the Sound Control Panel should become available.)
2. Click the Playback tab and select USB Audio Codec* as the default device.
3. Click the Recording tab and select USB Audio Codec* as the default device.
4. Click Properties in the lower right-hand corner.
5. In the new window, click the Advanced tab and select 2-channel, 16-bit, 44100
Hz (CD Quality) as the default format.
6. Uncheck both boxes under Exclusive Mode.
7. Click OK to close the Properties window.
8. Click OK to close the Sound control panel.
WINDOWS XP:
1. Go to Start Menu Control Panel
2. Click the Audio tab.
3. Under Sound Playback and Sound Recording, select USB Audio Codec* as the default device.
4. Click OK.
MAC:
1. Go to Applications
2. In the Audio Devices tab under System Settings, select USB Audio Codec* as your Default Input and Default Output.
3. Close the window.
Sound. (If you don't see Sound, select
Sounds and Audio Devices.
Utilities Audio MIDI Setup.
Computer
Power
1
Speakers
Headphones
Be sure your audio software
program is set up to receive audio
via the MultiMix 6 USB. This can
usually be done in your software's
"Preferences" or "Device Setup."
Please consult your software
manual for more information.
* If you have other USB audio
devices connected to
computer, which may
identical names, you may need to
try selecting each one until the
MultiMix 6 USB is recognized.
your
have